Solar panel MPPT controller 5A DC DC digital display Step-down module CC CV

• Module parameters:
• Module name: 5A step-down constant voltage constant current MPPT
• Module nature: non-isolated step-down module (BUCK)
• Input voltage: 6-36V
• Output voltage: 1.25-32V continuously adjustable, (default output is 5V.)
• 1.25-32V fixed delivery is adjustable output
• MPPT voltage setting range: 6-36V
• Output constant current range: 0.05-5A, long-term working current is recommended to be within 3A
• (The output constant current is 3A)
• Range of output turning light: 0.01-5A (turning light current is 0.3A) The current range will have a little error due to the difference of part parameters.
• Working temperature: -40~+85 degrees
• Working frequency: 180KHz
• Conversion efficiency: 95% (efficiency is related to input, output voltage, current, and pressure difference)
• Short circuit protection: Yes (the current limit is the set constant current value)
• Over-temperature protection: Yes (automatically shut down the output after over-temperature)
• Input reverse connection protection: none, (if necessary, please put a diode in series in the input)
• Output anti-reverse irrigation protection: No, anti-reverse diode must be added when the output is connected to the battery, otherwise the module will be burned out! Remember! (There is a reserved anti-reverse irrigation diode position, you can add it yourself if you need it.)
• Charging indicator: red light when charging, green light when fully charged. The turning lamp detection method is electric current. When the solar panel is used for power supply, the charging current during solar hours is also very small, which is lower than the current of the rotating lamp, and the green light will also be on, but it is not fully charged at this time, please pay attention to the distinction.