Light, Color Sensors
Out Of Stock
Brand: xcluma
Model: BE-002923
Features
·
Resolution: 500dpi
·
Supply current: <60mA
·
Voltage: 3.3V
·
Fingerprint image entry time: <1.0 sec..
Rs983.00
Brand: xcluma
Model: BE-002791
·
High photo sensitivity
·
Radiant sensitive area (in mm2): 7.5
·
High radiant sensitivity
·
Suitable for visible and n..
Rs96.00
Out Of Stock
Brand: xcluma
Model: BE-002198
Opt101 Analog Light Sensor Light Intensity Module Monolithic Photodiode 1 orderFeatures:OPT101 is an illuminance photoelectric sensor integrating a photodiode and a specially optimized operational amplifier. Transparent packaging enables the photodiode to have a larger sensing surface, higher sensit..
Rs160.00
Out Of Stock
Brand: xcluma
Model: BE-002169
TCS34725 RGB Color Sensor with IR Filter and White LEDSpecifications:1. Red, Green, Blue (RGB), and White Light Sensing with IR Blocking Filter2. Programmable Analog Gain and Integration Time3. 3,800,000:1 Dynamic Range4. Very High Sensitivity ? Ideally Suited for Operation Behind Dark Glass5. Maska..
Rs224.00
Brand: xcluma
Model: BE-002195
TEMT6000 Light Sensor ModuleFeatures: - Max.sensitivity: 570nm- Semi sensitivity angle: +/-60degree Package Included: 1PCS*TEMT6000 Light Sensor TEMT6000 Professional Light Sensor Module..
Rs97.00
Brand: xcluma
Model: BE-000938
DESCRIPTION:
BFD-1000 specifically designed for use as a black (white) line finding, especially for complex black and white line, cross black and white line detection, it has 6 high sensitivity infrared sensor (5 road patrol line, a road barrier shield), black and white line to the accurate recog..
Rs98.00
Brand: xcluma
Model: BE-000916
SPECIFICATION:
Address of this module can be changed. By default, the address is '0100011'.
You can connect the solder bridge in the ADDR box. Then the address becomes '1011100'.
You can also do other configurations. For more information, you can refer to the datasheet.
..
Rs69.00
Out Of Stock
Brand: xcluma
Model: BE-000940
DESCRIPTION:
The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response at 520nm, with IR response less than ±5%, of the peak response, above 900nm. ..
Rs109.00
Hot
Brand: xcluma
Model: BE-000929
DESCRIPTION:
The CNY70 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light.
APPLICATION:
Optoelectronic scanning and switching devices i.e., index sensing, coded disk scanning etc. (optoelectronic encoder assemblies). L..
Rs50.00
Brand: xcluma
Model: BE-000911
DESCRIPTION:
This is a small micro switch sensor designed for the Arduino. It could be directly connected to the IO Expansion shield. It integrates the pull-up resistor and the status indicator LED onboard. That makes it easier for testing.The miniature snap-action micro switch with roller lever ..
Rs35.00
Out Of Stock
Brand: xcluma
Model: BE-000924
DESCRIPTION:
Fingerprint scanners are awesome. use a key when you have one right at the tip of your finger? Unfortunately, they're usually unreliable or difficult to implement. Well not anymore! We've found this great fingerprint module from ADH-Tech that communicates over TTL Serial so you..
Rs1,800.00
Brand: xcluma
Model: BE-000913
DESCRIPTION:
GP2Y1010AU0F is a dust sensor by optical sensing system.
An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device.
It detects the reflected light of dust in air.
Especially, it is effective to detect very fine particle ..
Rs275.00
Brand: xcluma
Model: BE-000936
FEATURES:
1. Size: 11 mm x 27 mm
2. Low power consumption, the power supply voltage of 2.5 V ~ 5 V, working current is microamps level
3. Good linear
4. High sensitivity
5. High stability
6. Wide detection range: 240 nm to 370 nm
7. The big Angle: 130 degrees
8. Schottky type..
Rs264.00
Brand: xcluma
Model: BE-000097
FEATURES:
BH1750FVI ROHM chip
Power supply: 3-5 v
Data range: 0-65535
Sensor built-in and bitad converter
Direct digital output, bypassing the complicated calculation, omit calibration
Do not distinguish between ambient light
Close to the visual sensitivity of spectral characterist..
Rs315.00
Brand: xcluma
Model: BE-000930
DESCRIPTION:
Pulse sensor is used to test the heart rate sensor, students, artists, athletes,
creators, games or mobile terminal developers can develop heart-related and
interactive works. Sensor can be worn on the finger or earlobe, can be connected
with Ard uino line ..
Rs125.00
Brand: xcluma
Model: BE-001359
DESCRIPTION:
Laser sensor Module
Condition: New
Operating voltage 5V
Output wavelength 650 nm
3 pins module
With fixed bolt hole for easy installation
Warning: This is a low power laser device, however as with all laser devices care should be taken when in use. You should never..
Rs44.00
Brand: xcluma
Model: BE-000283
DESCRIPTION:
PCB size:1.52cm x 2.22cm
Working Voltage: 5 Volt DC
Output: 4-5 Volt DC
On detecting a laser signal, output goes at high level (5V) until laser signal is there.
NOTE: This sensor is non-modulator, to be used indoors away from any bright light or direct s..
Rs68.00
Out Of Stock
Brand: xcluma
Model: BE-000945
DESCRIPTION:
Features boost circuit
Signal output indicator
SPECIFICATION:
Effective distance: 0.8m(typ), 1.5m(max)
Power: 2.5V ~ 5.0V
Dimension: 47.7mm * 17.9mm
Mounting holes size: 2.0mm
APPLICATION:
Obstacle detection
Pipeline counter
Smart robot
Obstacle..
Rs1,467.00
Out Of Stock
Brand: xcluma
Model: BE-000293
DESCRIPTION:
Odometers are extremely useful for cars, they tell you how far you have gone, wouldn't it be nice if you were able to have a device that does the same for electrical current? The LTC4150 Coulomb Counter Breakout is here to be your odometer for current. If you are wondering: a coulomb..
Rs376.00
Brand: xcluma
Model: BE-000910
DESCRIPTION:
1,On-board LM393 voltage comparator chip and HALL sensing probe.
2,Support 5V/3.3V voltage input.
3, On-board signal output instructions, output the effective signal is low, at the same time indicator light up; Output signal can directly connect with the microcontroller I..
Rs213.00
Brand: xcluma
Model: BE-000036
Photosensitive Sensor Module Light Detection Module
Features:
For Light intensity detected,light brightness sensors,Smart car module
Using the sensitive type photosensitive resistance sensor
Waveform of the comparator output signal is good,strong driving ability
With adjustable potentiomete..
Rs25.00
Out Of Stock
Brand: xcluma
Model: BE-000933
DESCRIPTION:
The QRD1114 reflective sensor consists of an infrared (IR) emitting diode and an NPN silicon photodarlington mounted side by side in a black plastic housing.
The on-axis radiation of the emitter and the on-axis response of the detector are both perpendicular to the face of the QRD..
Rs67.00
Brand: xcluma
Model: BE-000296
DESCRIPTION:
This is RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, r..
Rs175.00
Brand: xcluma
Model: BE-000267
DESCRIPTION:
Brand new and high quality.
KY-040 rotary encoder module for Arduino.
Working voltage: 5V.
Pulse number per revolution: 20.
Size: 2cm x 3cm x 3cm.
..
Rs43.00
Brand: xcluma
Model: BE-000942
DESCRIPTION:
1, onboard precision micro voltage transformer
2, high precision op-amp circuit board, do accurate sampling for the signal and appropriate compensation, and other fu..
Rs112.00