On-Screen Display APM OSD MinimOSD ARDUPILOT MEGA OSD APM2.0 APM2.5

Out Of Stock

Thanks for Your Trust and Support!!!

On-Screen Display APM OSD MinimOSD ARDUPILOT MEGA OSD APM2.0 APM2.5

Stock: Out Of Stock
Brand: xcluma
Model: BE-001508
MPN: BE-001508

0 reviews - Write a review

Rs979.00

(GST +18%Extra)

Qty

Add to Cart

Direct Checkout Ask Question

Add to Wish List Compare this Product

free shipping Order Above 499--**

Dispatch within 24 Hours*

7 Days Replacement Only

Description
Reviews

DESCRIPTION:

MinimOSDis a super-tiny board designed by 3DRobotics. It's all you need to get OSD telemetry data from ArduPilot Mega. Just connect your FPV camera and a video link and you're ready to fly with instruments on screen.

It's intended to be a dedicated APM telemetry video output. So, it readsMAVLinkmessages from its RX and request rates from APM if you connect its TX to ArduPilot "telem" port.

Important note:You cannot connect the OSD when your APM 2 is also connected via USB (they share the same port).Make sure you disconnect your USB cable from the APM 2 board before attempting to use the OSD

Details

It has the Max7456 chip powered by two stages to avoid noises from servos attached to ArduPilot Mega board.
It provides an extra clean power line to feed the FPV camera and video link.
The approach is to use two external power sources: 12V from a Lipo Battery and 5V from APM

Raw 12V from Lipo Battery:
- Feeds directly FPV camera and video transmitter.
- It also feeds Max7456's analog line (AVDD and AGND) by a 5V voltage regulator (avoiding noises from servos attached to APM).

5V from APM telem port:
- Feeds the ATmega 328P and Max7456's digital line (DVDD and DGND);

Note: Optionally, you can use two solder jumps to "tie" digital and analog lines.