DESCRIPTION:
2.4G 2DBI RP SMA Male Antenna Interface WIFI wireless 109MM long omnidirectional antenna
Name: 2.4GHzAntenna
Scope: IEEE802.11 b/g/n WLAN System
Wireless Communication System
Wi-Fi / WiMAX / MIMO System
S.W.R <= ..
FEATURES:
100% brand new & high quality
Quantity: 1 Pcs
Color:Blue
Size:68*22*18 mm
Intergrated fst ethernet for MAC,physical chip and transceiver inone chip
Supports 10Mb/s and 100Mb/s N-way auto-negetiation operation
Compliant to USB interface version 1.0/1.1
Full-speed(12M..
FEATURES:
Supports 90~ 250V AC input
Support max 10A input
Power: 3500W(16A)
Support fast configure SSID and password connection through APP
Support automatic connect to server, register and update status info.
Support tracking device statu..
DESCRIPTION:
Works with all OBD-II compliant vehicles.
Software included in CD for Smartphone, PC
Clear trouble codes and turn off the MIL ("Check Engine" light).
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code defi..
DESCRIPTION:
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chip..
DESCRIPTION:
ESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module.
The entire solution is the least amount of PCB area. this board is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power technolog..
DESCRIPTION:
ESP-32S Wifi Bluetooth combo module is ultra high performance and ultra low-power consumption Wi-Fi and Bluetooth combo wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S integrates dual-core processor, 448 KByte ROM,520 KByte SRAM,16 KByte SRAM in RTC, 802.11 b/g/n/e/I Wi-F..
DESCRIPTION:
ESP32 is a complete,small form factor(SFF)802.11 b/g/n/e/i(2.4GHz)WLAN plus BT4.2combo solution optimized for low-power,mobile consumer electronics,wearable and Internet of Things(IOT) devices.ESP32 integrates all WLAN and BT functionality in a single package to support a l..
DESCRIPTION:
The use of CP2102 as the bottom of the USB to serial, super stable!
Support a key to download, eliminating the tedious operation
Support ESP32-Bit and other modules
Support Linux, Windows, Mac three development platform
The needle is not reserved for welding, the user can ..
DESCRIPTION:
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
..
DESCRIPTION:
Full IO port leads directly to support AT and internal product development ESP8266
Shielded case, raise a level of stability
Supports 3-way PWM 6 AD and all the way along the road IO speed UART
Firmware upgrade, available client (phone or PC) to directly control PWM IO or wi..
DESCRIPTION:
ESP-12F is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. ESP-12F has better antenna compared to the ESP-12E, increasing its range. In all ways it is the same and is fully pin-compatible with ESP-12E.
SPECIFICATION:
802...
DESCRIPTION:
ESP8266 WIFI Wireless Transceiver Module
Condition: New
Can be used as the IO module
All IO lead out
With antenna, farther than others
IPX interface on board
Low consumption, and more cheaper
..
DESCRIPTION:
This is a support cloud intelligent hardware development kit, the history of the most simple and most cost-effective iot development board, don't need you to understand the knowledge of the network, the TCP/IP and other complex, as long as you will C language, can use emc's wit cloud..
DESCRIPTION:
After modules such as VoCore, AsiaRF AWM002, and ESP8622, here’s come xWifi. This module is based on Mediatek MT7681 SoC which includes a TCP/IP stack like Espressif ESP8622 or TI CC3300, so it won’t run OpenWRT like VoCore or AsiaRF modules. The module only consu..
DESCRIPTION:
Based on the ESP-8266EX.
Arduino Compatible, you can use it on Ard uino IDE.
11 Digital I/O pins
1 Analog Input pin
OTA -- Wireless Upload(Program)
On board switching power supply -- Max 24V input, 5V 1A output
..
DESCRIPTION:
Gold-plated machined brass construction
Gold-plated contacts - teflon insulator
Great for wireless router, access point repair or similar projects
Connect high gain IPX to SMA
SPECIFICATION:
Connector: IPX IPEX to RP-SMA female jack(center male pin)
Cable type: 1.13 U.FL
L..
FEATURES:
Chipset: MT7601
for Peak throughtput: 150Mbps
Built-in smart antenna
Antenna: 2dBi antenna
en/UploadFiles/SL-1501N.jpg wireless transmission speeds up to 150Mbps
In line with IEEE802.11b, IEEE802.11g, IEEE802.11n standard
WPS security settings with one-click button,
..