Feature:
Differential 4-Channel Multiplexer with Two Binary Control Inputs
The Two Binary Inputs Select Which Pair of the 4-Channels is Connected to the Differential Output
Low ON Resistance and High OFF Resistance
Operating Temperature to 85oC
Low Power TTL
*Image shown is a repr..
74HCT138 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL).
74HCT138 decoder accepts three binary weighted address inputs (A0, A1 and A3) and when enabled, provides 8 mutually exclusive active LOW outputs (Y0 to Y7).
74HCT138 features three enable i..
DESCRIPTION:
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
This chip is like a rotary switch - it internally routes the common pin
(COM in the schematic, SIG on the board)to one of 16 channel pins (CHANxx).
..
DESCRIPTION:
This pen is a water-proof containing permanent ink which has etch resist properties. A nylon tipped pen for fast fabrication of perfect printed circuit boards. Circuits can be drawn on plain copper laminate and then etched in Ferric Chloride or etchant solutions. Allow it to dry for ..
DESCRIPTION:
The TIP122 is a Darlington pair NPN transistor. It functions like a normal NPN transistor,but since it has a Darlington pair inside it has a good collector current rating of about 5A and a gain of about 1000.It can also withstand about 100V across its collector- Emitter hence ca..
DESCRIPTION:
Power Transistor is designed for general–purpose switching and amplifier applications.
DC Current Gain — hFE = 20–70 @ IC = 4.0 Adc
Collector–Emitter Saturation Voltage — VCE(sat) = 1.1 Vdc (Max) @ IC = 4.0 Adc
Excellent Safe Operating Area
..
DESCRIPTION:
Power Transistor is designed for general–purpose switching and amplifier applications.
Collector-Emitter Volt (Vceo): 100V
Collector-Base Volt (Vcbo): 100V
Collector Current (Ic): 3.0A
hfe: 10-50 @ 3000mA
Power Dissipation (Ptot): 40W
Current-Gain-Bandwidth (ftotal): ..