SPECIFICATION:
Voltage: AC 220V
Maximum power: 10000W (connected resistive load, 220VAC) Practically Use on 50% capacity means 5000W
Voltage regulation: AC 10V to 220VAC
Dimension: 130 x 60 x 47mm
Rated current: 25A MAX 45A
For electric furnace, water heater, lamps, small motor,..
DESCRIPTION:
This is a low cost but very effective temperature sensor.
Thermistor is a thermal resistor which changes its resistance with temperature.
The resistance goes up for ice and goes down when placed near hot flame.
..
SPECIFICATION:
Stainless steel sheath and waterproof
Measurement range: -20 to 105 C
Length of wire:1 meter
Size of probe: 5 x 25 mm
Output 2 wires
Type: NTC 10k 1% 3950
measure environmental temperatures using arduino ADC and this 10k NTC LINK
Resistance to temperature conversio..
DESCRIPTION:
8 in 1 Function: Digital altimeter, with digital barometer, digital compass, weather forecast, time , calendar, thermometer , and backlight.
The device is based on the technology of electronic bearing sensor and barometric sensor
The digital altimeter is designed for outdoor us..
DESCRIPTION:
The Analog Test Board is an accessory board includes an onboard Audio Power Amplifier LM386M, and two high-precision adjustable resistor used for adjusting input voltage level (0-3.3V, 2 channel), and a speaker for indicating the output voltage level by sound volume (1 chan..
DESCRIPTION:
Digital °C /° F thermometer for fish aquarium or reptile terrarium.
Large, easy to read LCD
Compact design for discrete use
Simple operation
High quality suction base, easy to install
Powered with LR44 button cell (included)
Specific..
DESCRIPTION:
Freezer Temperature Controller Fast Using
1.1 Please check the wiring according to the user manual, caution don’t over voltage or over load.
1.2 Setting mode:press “SET” key for 5sec, the meter will display P0, then press “SET” key again to select “H” heating mode or “C” coolin..
DESCRIPTION:
Freezer Temperature Controller Fast Using
1.1 Please check the wiring according to the user manual, caution don’t over voltage or over load.
1.2 Setting mode:press “SET” key for 5sec, the meter will display P0, then press “SET” key again to select “H” heating mode or “C” coolin..
FEATURES:
Supports 90~ 250V AC input
Support max 10A input
Power: 3500W(16A)
Support fast configure SSID and password connection through APP
Support automatic connect to server, register and update status info.
Support tracking device statu..
ENC28J60 Ethernet LAN Network Module Schematic For Arduino 51 AVR LPCIT IS 10 PIN IF NEED 12 PIN PLEASE DONT BUY
Features:
Brand new and high quality.
chip board ENC28J60-I/SO.
the board 25MHZ crystal.
the network interface board HR911105A.
3.3 V power supply pin.
Size:5.9cm..
FEATURES:
Chip board ENC28J60-I/SO
The board 25MHZ crystal
The network interface board HR911105A
3.3 V power supply pin
The board size of 56 (mm) x 34 (mm)
..
DESCRIPTION:
This Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your for Arduino Online.
It is directly supported by For Arduino official Ethernet Library.
It adds a micro-SD card slot, which can ..
DESCRIPTION:
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple.
FEATURES:
Operating voltage: 3. 0~5. 5V.
Internal integrated cold junction compensation circuit.
With a simple three serial SPI interface.
Temperature signal can ..
Product description:
The rain sensor detector can detect raindrops water, so it can be used for detection systems that perform functions required when it begins to rain.
This module consists of a series of printed conductor paths on a Bakelite plate.
..
DESCRIPTION:
The 127 couples, 40mm x 40mm size module is a single stage module which is designed for cooling and heating up to 90°C applications.
TECHNICAL SPECIFICATIONS:
Size 40x40x3.4mm (WxDxH)
Imax 5A
Umax 15.4V
Qmax (ΔT =0) 42.5W
ΔT max. = 65°C
FEAT..
TECHNICAL SPECIFICATIONS:
Size 40x40x3.75mm(WxDxH)
Imax 6A
Umax 12V
Qmx(ΔT=0) 60-71W
ΔT max =83° C
FEATURES:
No moving part, no noise
Compact Structure, small in size, light in weight
ROHS Compliant
Exceptionally reliable in quality, high performance
..
FEATURES:
Precise temperature control.
Solid state, vibration free, noise-free.
Simple to install and operate.
Each device is fully inspected and tested.
Fitted with 14cm insulated leads .
Perimeter sealer for moisture protection.
This device mus..
DESCRIPTION:
1, the voltage comparator LM393 chip on board and the detection temperature probes
2 support 5 V / 3.3 V Input Voltage
3 board signal output instructions, output valid signal is high, while LED lights, the output signal can be directly connected to the microcontroller IO
4, ..