SPECIFICATION:
Stainless steel sheath and waterproof
Measurement range: -20 to 105 C
Length of wire:1 meter
Size of probe: 5 x 25 mm
Output 2 wires
Type: NTC 10k 1% 3950
measure environmental temperatures using arduino ADC and this 10k NTC LINK
Resistance to temperature conversio..
BMP180 Barometric Pressure/Temperature/Altitude Sensor- 5V ready
1)Measuring the absolute pressure of the environment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height ..
Product Name
Resistance Temperature Sensor
Transfer Type
PT100
Temperature Range
-50- +250°C
External Shielding
Insulated Shield
Probe Diameter
3mm/ 0.12"
Probe Length
43mm/ 1.7"
Cable Length
..
DESCRIPTION:LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typic accuracies. The LM35's low output impedance, a linear output, and precise inherent calibration ..
DESCRIPTION:
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple.
FEATURES:
Operating voltage: 3. 0~5. 5V.
Internal integrated cold junction compensation circuit.
With a simple three serial SPI interface.
Temperature signal can ..
FEATURES:
4.5V~5V power supply
Small size, low cost
Mounted on a breakout board with two types of pins
10k Pull up resistors for the I2C interface with optional solder jumpers
Easy to integrate
Factory calibrated in wide temperature range:
..
DESCRIPTION:
The 127 couples, 40mm x 40mm size module is a single stage module which is designed for cooling and heating up to 90°C applications.
TECHNICAL SPECIFICATIONS:
Size 40x40x3.4mm (WxDxH)
Imax 5A
Umax 15.4V
Qmax (ΔT =0) 42.5W
ΔT max. = 65°C
FEAT..
DESCRIPTION:
100% Brand New and high quality
HYPERION EOS CHARGER
Temperature Sensor Cable
Temp Sensor for any Hyperion Charger with a Temp Sensor Port!
SPECIFICATION:
Size:325mm(Length)
Net weight:6g
Color:Black+White+Red
..
DESCRIPTION:
1, the voltage comparator LM393 chip on board and the detection temperature probes
2 support 5 V / 3.3 V Input Voltage
3 board signal output instructions, output valid signal is high, while LED lights, the output signal can be directly connected to the microcontroller IO
4, ..