Search Criteria
Products meeting the search criteria
Out Of Stock
Brand: xcluma
Model: BE-001526
DESCRIPTION:
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-curre..
Rs799.00
Brand: xcluma
Model: BE-001512
DESCRIPTION:
100% Brand New and High Quality
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).
Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.
The two mo..
Rs199.00
Brand: xcluma
Model: BE-000200
DESCRIPTION:
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current reg..
Rs166.00
Brand: xcluma
Model: BE-000974
FEATURES:
1.2 HG7881 chip on board motor control.
2.The module can simultaneously drive two DC motors or a 4-wire two-phase stepper motor.
3.The module input voltage: 2.5-12V
4.Each channel has a 800mA continuous output current capability.
5.PCB dimensions: &nb..
Rs73.00
Brand: xcluma
Model: BE-000028
DESCRIPTION:
The board has 6 male pins and 2 double terminals.
The motors connect to the 2 terminals. In the middle of the male pins are the VCC and GND pins. This is the input voltage for the L9110 chips. Some H-bridges like the L293 and L298 require a logic voltage and a separate voltage ..
Rs53.00
Brand: xcluma
Model: BE-000264
DESCRIPTION:
This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board. 5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development board
Motor:
- Di..
Rs120.00
Out Of Stock
Brand: xcluma
Model: BE-001467
FEATURES:
Drive mode: Constant current chopper drive
Excitation mode: 2-phase excitation (2-phase four-run), can forward and reverse rotation
Steering: AB-BC-CD-DA sequentially energized
Rated current (single-phase): 1.5A DC
Power supply voltage: 12-36V
Step Angle: 1.8 °
Insulation..
Rs2,010.00
Brand: xcluma
Model: BE-000083
DESCRIPTION:
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to A4988 stepper motor drive carriers, so it can be used as ..
Rs110.00
Brand: xcluma
Model: BE-001517
DESCRIPTION:
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It pro..
Rs250.00
Showing 1 to 9 of 9 (1 Pages)