DESCRIPTION:
0.96-inch OLED module features
high resolution: 128X64 (and 12864LCD the same resolution. but the OLED screen more pixels per unit area)
super wide viewing angle: more than 160 ° (maximum viewing angle display a screen)3. ultra-low power consumption: normal display 0.06W (far..
FEATURES:
Brand new and high quality.
Simply wrap strap around wrist and clip to a grounded source
Prevent Static shock in dry environment
Keep static from damaging electronic parts and equipments
Adjustable wrist strap with alligator clip tip
Inner conducting layer made of stainless..
General
Brand
NO
Model
NO
Quantity
1Piece
Color
Deep Blue
Material
Acrylic
Specification
English Manual / Spec
No
Other Features
Other Features
Thicknes..
DESCRIPTION:
Perfectly fits into Raspberry Pi SD card holder.
No edge exposed outside card slot to avoid damage of card or main board.
TF deck with gold plated.
low-profile and easy to use.
High quality and reliable product.
..
DESCRIPTION:
Sensitive material MQ-3 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). When present in the environment in which the alcohol vapor sensor , a conductivity sensor with increasing concentration of alcohol gas in air is increased . Using a simple cir..
DESCRIPTION:
MQ-5 sensor :
Sensitive material MQ-5 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). When there is the environment in which the combustible gas sensor , conductivity sensor with increasing concentration of combustible gases in air increases . ..
DESCRIPTION:
MQ-4 Sensor :
Sensitive material MQ-4 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). When there is the environment in which the combustible gas sensor , conductivity sensor with increasing concentration of combustible gases in air increases . ..
DESCRIPTION:
MQ-2 sensor:
MQ-2 gas sensor sensitive material used in the clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circu..
FEATURES:
1. Size: 11 mm x 27 mm
2. Low power consumption, the power supply voltage of 2.5 V ~ 5 V, working current is microamps level
3. Good linear
4. High sensitivity
5. High stability
6. Wide detection range: 240 nm to 370 nm
7. The big Angle: 130 degrees
8. Schottky type..
Description:
An on-board chip ISD1760
on-board microphone. you can record directly
can be 75 seconds or so voice recording
with recording.Erase.Play .FT straight . fast forward . reset.Volume control and other functions
the chip has led major pin can be controlled by th..
DESCRIPTION:
A dedicated and well-designed data logging shield for Arduino.
It is easy to assemble and customize, also equipped with extensive documentation and libraries.
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD c..
Description:
Main chip: ISD1820
Size: Approx. 38 x 42.5mm / 1.49 x 1.67 inch
Working voltage: DC 3-5V
Power supply: 3-5V, can be connected to row pin
Recording/playback control mode: Key control or singlechip, IO has drawn the line of control;
Main feature:
Convenient 10s re..
Package Include:
1X Micro SD Card Module
Description:
The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, micro controller system to complete the Micro SD..
SPECIFICATION:
Converts your microSD card to a SD card.
Allows you to use MicroSD in SD card slots.
Built-in write protection switch to keep your data safe.
..
DESCRIPTION:
WTV020-SD module is a voice Rewritable content type of mass storage voice module, pluggable maximum capacity of 1GB SD card memory. Can load WAV format voice, and AD4 formats voice.
WTV020-SD module voice chip WTV020SD-20S master core, with MP3 control mode, the key one-to-one c..
DESCRIPTION:
MinimOSDis a super-tiny board designed by 3DRobotics. It's all you need to get OSD telemetry data from ArduPilot Mega. Just connect your FPV camera and a video link and you're ready to fly with instruments on screen.
It's intended to be a dedicated APM telemetry video output. ..
DESCRIPTION:
It is easily interfaced as a peripheral to your for Arduino sensor shield module. Through programming, you can read and write to the SD card using your for Arduino.
FEATURES:
Brand new
Input Voltage: 3.3V/5V
With all SD SPI Pins out :MOSI, SCK, MISO and CS ,for further c..
DESCRIPTION:
This Bike Computer Odometer Speedometer has many useful functions
It is also very durable even after thousands of mile usage
The battery lasts for several thousand miles
It helps in tracking your training progress in real time
Easy operation and durability makes it p..