Search Criteria
Products meeting the search criteria
Brand: xcluma
Model: BE-001454
SPECIFICATION:
Voltage: AC 220V
Maximum power: 10000W (connected resistive load, 220VAC) Practically Use on 50% capacity means 5000W
Voltage regulation: AC 10V to 220VAC
Dimension: 130 x 60 x 47mm
Rated current: 25A MAX 45A
For electric furnace, water heater, lamps, small motor,..
Rs659.00
Hot
Out Of Stock
Hot
Hot
Brand: xcluma
Model: BE-001463
FEATURES:
Voltage: AC 0-220V
Maximum power: 4000W
Voltage Regulation: AC 0-220V
Size: L85mm x W60mm x H40mm rotation hole 6mm
SCR Model: BT-800B
..
Rs289.00
Brand: xcluma
Model: BE-001021
DESCRIPTION:
Right Angle Bend Pitch 5 Pins Female PCB Electrical Screw Terminal Block Connector Header
FEATURES:
5Pins.
Female.
Right Angle Bend.
MATERIAL:
Screws: M2.5, Steel with Zinc-Plating;
Spring Leaf: Bronze with Nickel-Plating;
Contacts: Brass&..
Rs34.00
Brand: xcluma
Model: BE-001460
FEATURES:
Maximum power: 5000 w (impedance load limit power), when used for a long time, should reduce the power, suggest using impedance load 2500 w.
Effective rate: more than 90%
Working voltage: AC 220 v
Output voltage: 0-220V
APPLICATION:
Lamp dimmer
Motor sp..
Rs389.00
Brand: xcluma
Model: BE-000398
DESCRIPTION:
Connect this device with lamp or home appliance in a series connection, then rotate the knob for dimming, speed, voltage, temperature control.
As the power has very big,so the normal home appliances or small factories enough to use.
This pressure regulator with two-way hi..
Rs183.00
Out Of Stock
Brand: xcluma
Model: BE-001710
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs15.00
Out Of Stock
Brand: xcluma
Model: BE-001711
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs15.00
Out Of Stock
Brand: xcluma
Model: BE-001712
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs20.00
Out Of Stock
Brand: xcluma
Model: BE-001713
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs20.00
Out Of Stock
Brand: xcluma
Model: BE-001714
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs25.00
Out Of Stock
Brand: xcluma
Model: BE-001715
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs25.00
Out Of Stock
Brand: xcluma
Model: BE-001716
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00
Out Of Stock
Brand: xcluma
Model: BE-001717
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00
Out Of Stock
Brand: xcluma
Model: BE-001718
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs15.00
Out Of Stock
Brand: xcluma
Model: BE-001719
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs15.00
Out Of Stock
Brand: xcluma
Model: BE-001721
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs20.00
Out Of Stock
Brand: xcluma
Model: BE-001720
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs20.00
Out Of Stock
Brand: xcluma
Model: BE-001722
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs25.00
Out Of Stock
Brand: xcluma
Model: BE-001723
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs25.00
Out Of Stock
Brand: xcluma
Model: BE-001724
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00
Out Of Stock
Brand: xcluma
Model: BE-001725
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00
Out Of Stock
Brand: xcluma
Model: BE-001508
DESCRIPTION:
MinimOSDis a super-tiny board designed by 3DRobotics. It's all you need to get OSD telemetry data from ArduPilot Mega. Just connect your FPV camera and a video link and you're ready to fly with instruments on screen.
It's intended to be a dedicated APM telemetry video output. ..
Rs979.00