DESCRIPTION:
A DC motor with gear box attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
SPECIFICATIONS:
RPM: 100
Oper..
DESCRIPTION:
motor brush controller for Electric bicycle & scooter
rated voltage: dc 24 v
Current limit : 22A
rated power: 250 w
matching motor: dc brushed motor
Under Voltage Protection: 20V
Wires Interface Definition
Battery :Thick Black (Power Negative) /Thick Re..
Product description:
L293 and L293D are quadruple half H Bridge driver having high current capability. It can also be seen as a dual H Bridge driver for driving Motors. L293D can provide currents up to 600mA and L293 can provide currents up to 1A at ..
DESCRIPTION:
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-curre..
DESCRIPTION:
3D Heatbed MK2a is currently the best construction of its kind on the market. Check it out yourself! It was proven by thousands of satisfied users. The maximum temperature which can be reached is 120°C and the device heats up from 0°C to 100°C in 5 minutes at..
Product description:
Main Features:
This Motor Smart Car Kit is a best Robot learning tutorial
Motor power supply is 3V-6V
All the parameter below is tested without load
This is a complete motor smart car kit, all you need to do is to finish it by starting from one part
..
DESCRIPTION:
A dead axle Dummy Motor is designed in such a way that it represents the axle size and shape of an actual motor but is a passive component as it is just used as a support for fixing un-powered wheels in the robot chassis. You can also connect a 6mm <=> 4mm Coupling to connect 4..
DESCRIPTION:
80% max efficiency
4-10A max efficiency current
No Load Current: 10 V : 0.5 A
12A / 60s current capacity
2-3 Li-Poly cells
Suitable for airplane, aircraft, quadcopter.
Model: A2212
KV: 1000
MAX Efficiency: 80%
MAX Efficiency Current: 4-10A (>75%)
Current Cap..
DESCRIPTION:
Model: A2212
KV: 1400
MAX Efficiency: 80%
MAX Efficiency Current: 4-10A (>75%)
Current Capacity: 12A / 60s
No Load Current: 10 V : 0.4 A
Apply to the ESC: 30A.
Apply to the Lipo: 2 - 3S.
Apply to the NiCD / NiMH: 6 - 9S.
Shaft Diameter: 3.17mm
Weight: 50g ap..
DESCRIPTION:
Model:A2212
KV: 1800
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: φ27.5 x 30mm
Shaft Diameter: φ3.17mm
Weight: 48g
..
DESCRIPTION:
KV: 2200
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: φ27.5 x 30mm
Shaft Diameter: φ3.17mm
Weight: 48g
..
DESCRIPTION:
A caster wheel (or castor) is an undriven, single, double, or compound wheel that is designed to be mounted to the bottom of a larger object (the ""vehicle"") so as to enable that object to be easily moved. They are available in various sizes, and are commonly made of rubber, plastic..
DESCRIPTION:
100% Brand New and High Quality
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).
Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.
The two mo..
DESCRIPTION:
A DC motor with gear box attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
Dual shaft DC geared motor which give..
DESCRIPTION:
F550 is a multi-rotor designed for all pilots. With DJI WKM or NAZA autopilot system, it can achieve hovering, cruising, even rolling and other flight elements. It can be applied for entertainment, aerial photography, FPV and other activities. Made by advanced engineering material, s..
DESCRIPTION:
Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.Silm design on transmitter for easy handling!
This radio system uses a high gain a..
FEATURES:
1.2 HG7881 chip on board motor control.
2.The module can simultaneously drive two DC motors or a 4-wire two-phase stepper motor.
3.The module input voltage: 2.5-12V
4.Each channel has a 800mA continuous output current capability.
5.PCB dimensions: &nb..