DESCRIPTION:
A DC motor with gear box attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
SPECIFICATIONS:
RPM: 100
Oper..
DESCRIPTION:
12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily connect and internal threaded shaft for easily connecting it to wheel.
FEATURES:
12V DC motors with Gearbox
6 mm shaft diameter with int..
FEATURES:
Infrared technology based automatic motion sensor switch.
Automatic turn ON/OFF while detected people come or left.
Automatic locked in day time to save energy.
Easy to install or replace existing switch.
Good solution for energy saving.
SPECIFICATIONS:
Voltage: ..
DESCRIPTION:
LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays.
This is a very standard green LED. The lens is 3mm in diameter, and is diffused.
FEATURES:
2.0-2.4 VDC forward drop
Max current: 20mA
Suggested ..
DESCRIPTION:
BFD-1000 specifically designed for use as a black (white) line finding, especially for complex black and white line, cross black and white line detection, it has 6 high sensitivity infrared sensor (5 road patrol line, a road barrier shield), black and white line to the accurate recog..
DESCRIPTION:
Black Red Banana plug to Alligator clip cable is for testing electrical equipments. With insulating PVC material coated, it's safety to use.
Color
Red + Black
Material
Plastic + iron
Features
Adapter
Application
Suita..
DESCRIPTION:
First dimension: 32mm X 11mm X height 20mm width
Second, the main chip: LM393, infrared on the radio head
Third, the working voltage: DC 5 V
Four characteristics:
Having a signal output instruction.
A single-channel si..
FEATURES:
Working voltage:DC4V-28V
Working current:<20mA
Display: 0.28" Two color blue and red
Measuring range:DC 0-200V 0-10A Built-in shunt
Refresh rate: about 1S / 3times
Measure accuracy:
Operating temperature: -10 to 65° c
Working pressure: 80 to 106 kPa
size :4..
DESCRIPTION:
Working voltage: DC 3.3V-5V
Working current: try to choose more than 1A power supply
Working temperature: - 10oC - +50oC
Mounting aperture: M3 screws
Detection range: 1mm to 60 CM adjustable, the closer the performance more stable, white reflects the farthest distance.
S..
DESCRIPTION:
Dimensions:48mm x 29mm x 21mm
Measure voltage: DC 0-33.000V
Power Supply: DC 4-30V
Input Polarity: DC voltage
Refresh rate: 5 times per second
Measurement precision: ± (0.3 ‰ +2 digit)
Display: five 0.36" digital LED Tube
Display Color: Red
Operating temperature: -..
FEATURES:
1.Wide operating voltage: AC110V - 250V.
2.Way system:Two lines, the the ordinary manual switch connection
3.Then ordinary inductive switch then can not load: energy saving lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps (inductive with QiHuiQi), e..
DESCRIPTION:
This is Philips RC-5 code based IR remote. The RC-5 code from Philips is possibly the most used protocol by hobbyists, probably because of the wide availability of remote controls. The protocol is well defined for different device types ensuring compatibility with your whole entertai..
DESCRIPTION:
100% Brand new and high quality
Material: Copper
Voltage: 3V
Wavelength: 650nm
Power: 5mW
Diameter: 6mm
Cable length: 5cm
Dimensions: 0.55 in x 0.24 in x 0.24 in (1.4 cm x 0.6 cm x 0.6 cm)
Weight: 0.18 oz (5 g)
..
DESCRIPTION:
The TSOP 1738 is a member of IR remote control receiver series. This IR sensor module consists of a PIN diode and a pre amplifier which are embedded into a single package. The output of TSOP is active low and it gives +5V in off state. When IR waves, fro..
DESCRIPTION:
The TSOP 1838 is a member of IR remote control receiver series. This IR sensor module consists of a PIN diode and a pre amplifier which are embedded into a single package. The output of TSOP is active low and it gives +5V in off state. When IR waves, from a source, with a centre freq..
DESCRIPTION:
1,Onboard VS1838B high sensitivity infrared receiving head
2,Support 3-5 v input voltage
3,On-board RC filter, work more stable
4, Output matching TTL, CMOS level digital signal
5 PCB size: 21.2 (mm) x9.3 (mm)
..