DESCRIPTION:
This is a 5x2 line pin header in a box package. Notch marking is for pin 1. It can be directly soldered on PCB. 10 pin FRC Cable Connector can be used to connect it with other devices. Pin distance is 2.54 mm (0.1 inch).
..
The AT24C32 provides 32,768 bits of serial electrically erasable and programmable read only memory (EEPROM) organized as 4096 words of 8 bits each. The device’s cascadable feature allows up to 8 devices to share a common 2-wire bus. The device is optimized for use in many industrial and commer..
Description:range of -40°C ~ +85°C, the M24C64-W can operate with a supply voltage from 2.5V to 5.5V, the M24C64-R can operate with a supply voltage from 1.8V to 5.5V, and the M24C64-F and M24C64-DF can operate with a supply voltage from 1.7V to 5.5V ( the M24C64-F can also operate down to 1.6V, und..
FEATURES:
Low-power CMOS technology:
Maximum write current 5 mA at 5.5V
Maximum read current 400 μA at 5.5V
Standby current 100 nA, typical at 5.5V
2-wire serial interface bus, I2C™ compatible
Cascadable for up to eight devices
Self-timed erase/write cycle
128..
The 34063 is a monolithic control circuit containing the primary functions required for DC–to–DC converters. These devices consist of an internal temperature compensated reference, comparator, controlled duty cycle oscillator with an active current limit circuit, driver and high current output switc..
Category
Integrated Circuits (ICs)
Name
CD4001
Family
Logic - Gates and Inverters
Series
4000B
Logic Type
NOR Gate
Number of Inputs
2
Number of Circuits
4
Mounting Type
Sur..
DESCRIPTION:The 4008 is a 4-bit binary full adder with two 4-bit data inputs, a carry input (CIN), four sum outputs, and a carry output (COUT).The outputs give the sum of the two 4-bit binary numbers.The CD4008 is a high speed, high voltage 4-bit full Adder IC ..
Category
Integrated Circuits (ICs)
Name
CD40106, Hex Inverter Schmitt Trigger
Family
CMOS
Series
4000
Mounting Type
Surface Mount
No. of Pins
14 (DIP)
Feature:
Hex Schmitt..
Category
Integrated Circuits (ICs)
Name
CD4011
Family
Logic - Gates and Inverters
Series
4000B
Logic Type
NAND Gate
Number of Inputs
2
Number of Circuits
4
Mounting Type
Su..
Category
Integrated Circuits (ICs)
Name
CD4012, Dual D-type Flip-Flops with Set/Reset
Family
CMOS
Series
4000
Mounting Type
Surface Mount
No. of Pins
14 (DIP)
Feature:
Two..
Features:
Two Identical 4-stage Serial Input Parallel Output Registers with Independent Data, Clock and Reset Inputs
Medium Speed up to 8MHz
Wide Operating Voltage Range
Operating Temperature to 85oC
Low Power TTL
..
The CD4017 is the one of the most popular 16 pin CMOS Decade Counter (Divided by 10 Counter).
It takes clock signal from the clock input and turns on the 10 output in sequence, each time when it receives clock input pulses.
It is a 5 Stage Divide by 10 Johnson Counter with 10 Decoded output..
Category
Integrated Circuits (ICs)
Name
CD4020, 14-Stage Binary/Ripple Counter
Family
CMOS
Series
4000
Mounting Type
Surface Mount
No. of Pins
16 (DIP)
Feature:
14-stage R..
Category
Integrated Circuits (ICs)
Name
CD4022, Octal Counter/Divider
Series
4000
Mounting Type
Surface Mount
No. of Pins
16 (DIP)
Features:
4-stage Divide-by-8 Johnson Counter with 8 Dec..
Category
Integrated Circuits (ICs)
Name
CD4027
Family
Flip Flop Logic
Series
4000B
Logic Type
Flip Flop
Mounting Type
Surface Mount
Package / Case
DIP-16
No. of Pins
16
..
Specifications:
The 4040 is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical "1" at the reset input independent of clock.
Features:
High noise immunity: 0..