DESCRIPTION:
A DC motor with gear box attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
SPECIFICATIONS:
RPM: 100
Oper..
DESCRIPTION:
12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily connect and internal threaded shaft for easily connecting it to wheel.
FEATURES:
12V DC motors with Gearbox
6 mm shaft diameter with int..
DESCRIPTION:
motor brush controller for Electric bicycle & scooter
rated voltage: dc 24 v
Current limit : 22A
rated power: 250 w
matching motor: dc brushed motor
Under Voltage Protection: 20V
Wires Interface Definition
Battery :Thick Black (Power Negative) /Thick Re..
SPECIFICATIONS:
Voltage: DC 24V
Wattage: 350W
Undervoltage: 20+/0.5V
Handle: 1-4v
Dimension: 81 x 65 x 38mm/3.18 x 2.56 x 1.5"
Casing material: Aluminium
FEATURES:
* Wiring:
1. black & yellow connector - Brake wire
2. red & black connecotr - Charging port
3. ..
Product description:
L293 and L293D are quadruple half H Bridge driver having high current capability. It can also be seen as a dual H Bridge driver for driving Motors. L293D can provide currents up to 600mA and L293 can provide currents up to 1A at ..
DESCRIPTION:
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-curre..
DESCRIPTION:
This is brush motor controller
Suitable Voltage:36v
Match Motor:36V 350W
Protection:31.5±0.5V
Speed Regulator 1-4 V(Throttle )
This item Suitable for electric bike & scooter
WIRING INSTRUCTIONS:
for example, in order to work at least the motor can be connect..
SPECIFICATIONS:
Name: 36V 800W Electric Scooter Bicycle E-bike Brush DC Motor Speed Controller
Material:aluminum
Size: 9cm x 6.5cm x 4cm
Power: 800W
Input: 36V
Undervoltage: 31.5 + -0.5V
Turning: mechanical normally open
Applicable motor: 500W-800W motor
Use of models: ele..
DESCRIPTION:
Speed controller for DC Motor, up to 500w, 48Volts. This controller may be used for replacement of most Electric tricycle and other kinds of electric scooters, E-bikes, or E-ATVs. Check that voltage is compatible, motor is of same or less watts and for similarity in size, shape and c..
DESCRIPTION:
Speed controller for DC Motor, up to 800w, 48Volts. This controller may be used for replacement of most Electric tricycle and other kinds of electric scooters, E-bikes, or E-ATVs. Check that voltage is compatible, motor is of same or less watts and for similarity in size, shape and c..
DESCRIPTION:
Speed controller for DC Motor, up to 500w, 24Volts. This controller may be used for replacement of most Electric tricycle and other kinds of electric scooters, E-bikes, or E-ATVs. Check that voltage is compatible, motor is of same or less watts and for similarity in size, shape and c..
DESCRIPTION:
A dead axle Dummy Motor is designed in such a way that it represents the axle size and shape of an actual motor but is a passive component as it is just used as a support for fixing un-powered wheels in the robot chassis. You can also connect a 6mm <=> 4mm Coupling to connect 4..
DESCRIPTION:
100% Brand New and High Quality
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).
Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.
The two mo..
DESCRIPTION:
A DC motor with gear box attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
Dual shaft DC geared motor which give..
DESCRIPTION:
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current reg..
FEATURES:
1.2 HG7881 chip on board motor control.
2.The module can simultaneously drive two DC motors or a 4-wire two-phase stepper motor.
3.The module input voltage: 2.5-12V
4.Each channel has a 800mA continuous output current capability.
5.PCB dimensions: &nb..
DESCRIPTION:
Its heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel, controlled by an Atmel ATmega8L which handles the I2C communication with for example an Arduino.
Both motors can be driven simultaneously while set to a different speed and direction.
..
Product description:
The shield contains two L293D motor drivers and one 74HC595 shift register.
The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers.
The output enable of the L293D is directly connected to PWM outputs of ..
DESCRIPTION:
The Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your board, controlling the speed and direction of each one independently. You can al..
DESCRIPTION:
Helm small disc suitable for most standard servo steering gear, MG995 MG996 946 3003 and so on.
CNC metal servo arm a font 25T
25T: Futaba, savox, Xcore, HL, HSP, HD power,the tech.
..
DESCRIPTION:
1,On-board LM393 voltage comparator chip and HALL sensing probe.
2,Support 5V/3.3V voltage input.
3, On-board signal output instructions, output the effective signal is low, at the same time indicator light up; Output signal can directly connect with the microcontroller I..