The CD4047B is capable of operating in either the monostable or astable mode. It requires an external capacitor (between pins 1 and 3) and an external resistor (between pins 2 and 3) to determine the output pulse width in the monostable mode, and the output frequency in the astable mode.
..
DESCRIPTION:
Sensitive material MQ-9 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). Detection method using low temperature cycling (1.5V heating ) to detect carbon monoxide, conductivity sensors with carbon monoxide in the air increased with increasing gas co..
DESCRIPTION:
MQ-7 gas sensor is sensitive material used in clean air, low conductivity tin dioxide (SnO2). Detection method using low temperature cycling (1.5V heating) detect carbon monoxide, airborne sensor conductivity increases with the increase of the concentration of carbon monoxide gas, hi..
DESCRIPTION:
Portable and compact.
Easy installation, no need to debug.
LCD Display with a blue ground Light.
Loud 85 decibel alarm with LED Flash While in the Alarm Mode.
Precise electro-optical sensor, high consistency and stability
Specifications:
..
DESCRIPTION:
TDA8932 35W mono digital amplifier module
The board uses a high-performance digital amplifier TDA8932 chip, a small size, high efficiency, high power, good sound quality, without additional installation of radiator, very suitable for the transformation of active speakers, electro-..
DESCRIPTION:
Sound quality is very good and it can drive 4/6/8 ohm speakers. It has sufficient and high power output 2*160W.
FEATURES:
High output power digital amplifier.
Sound quality is very good by using this module.
Two-channel stereo, 2*160W.
DC 15-36V..