The ATmega16A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It has 16K bytes of In-System Programmable Flash Program memory with Read-While-Write capabilities, 512 bytes EEPROM, 1K byte SRAM. By executing powerful instructions in a single clock cycle, the ATm..
FEATURES:
Support for the Arduino IDE 1.0+ (OSX / Win / Linux)
Power via USB or External Source - 5V or 7 - 35V (automatic selection)
On-board 500ma 5V Regulator
Built-in USB (and serial debugging)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, othe..
DESCRIPTION:
The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response at 520nm, with IR response less than ±5%, of the peak response, above 900nm. ..
DESCRIPTION:
This is a very basic sound input sensor, it converts sound waves to electrical signal. Electret Condenser Microphone has a built in condenser (another name of capacitor) which holds electric charge, sound wave moves plate of condenser so capacitance changes and it creates voltage var..
DESCRIPTION:
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
Dimensions: 12.8X12.8X1.3cm/
Fixing screws with 64 holes with a diameter 3mm
Module with input and output int..
Package Include:
1X Micro SD Card Module
Description:
The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, micro controller system to complete the Micro SD..
SPECIFICATION:
Converts your microSD card to a SD card.
Allows you to use MicroSD in SD card slots.
Built-in write protection switch to keep your data safe.
..
DESCRIPTION:
100% brand new and high quality
Charge module- Linear charging.
It has MICRO USB female
It still retain the input voltage wiring solder joints, can be very convenient to DIY
..
DESCRIPTION:
1. Size: 37mmX45mmX8mm
2. the main chip: HB100
3. work voltage: DC 5V
4. HB100 is the use of microwave Doppler radar module (Doppler Radar) design principles of the microwave detector moving objects. mainly used in automatic door control switches. security systems. ATM ATM automated..
DESCRIPTION:
WTV020-SD module is a voice Rewritable content type of mass storage voice module, pluggable maximum capacity of 1GB SD card memory. Can load WAV format voice, and AD4 formats voice.
WTV020-SD module voice chip WTV020SD-20S master core, with MP3 control mode, the key one-to-one c..
DESCRIPTION:
This is a Quartz Crystal which is used to provide clock source to your microcontroller.
Every Microcontroller has inbuilt oscillator circuit, connecting this quartz crystal with microcontroller forms the crystal oscillator circuit which provide the desired frequenc..
DESCRIPTION:
Chip: SIM800L
Voltage: 3.7-4.2V
Support networks: China Mobile, China Unicom and global quad-band network
Module size: 2.5cmx2.3cm
TTL serial port for serial port, you can link directly to the microcontroller. No need MAX232
Power module automatically boot, homing networ..