Package Include:
1X ATMEL ATmega328 CH340G BOARD with USB CABLE Free
Product description:
Main changes from the older version:
Add two rows of the holes for the pins. So it can be connected with normal Dupont..
Features:
High performance, low power Atmel® AVR® 8-bit microcontroller
Advanced RISC architecture
131 powerful instructions – most single clock cycle execution
32 × 8 general purpose working registers
Fully static operation
Up to 20 MIPS throughput at 20MHz
On-chip 2-cycle..
FEATURES:
Operating Voltage: 1.8 to 5.5 V.
Flash memory: 16 Kb.
EEPROM: 512 Byte.
SRAM: 1K.
I/O pin: 32 pin.
USART protocol interface.
I2C protocol interface.
SPI protocol interface.
APPLICATIONS:
It is used in Arduino boards.
It can also use in any AVR microcontroll..
The ATmega16A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It has 16K bytes of In-System Programmable Flash Program memory with Read-While-Write capabilities, 512 bytes EEPROM, 1K byte SRAM. By executing powerful instructions in a single clock cycle, the ATm..
Package Include:
1X ATMEGA328P 5V/16M + 3 x sets of header pins
Product description:
Mini Pro is a micro-controller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs),
&nb..
Features:
High-performance, Low-power AVR 8-bit Microcontroller
Advanced RISC Architecture
131 Powerful Instructions - Most Single Clock Cycle Execution
32 x 8 General Purpose Working Registers
Up to 6 MIPS Throughput at 16MHz
Fully Static Operation
On-chip 2-cycle Multipli..
Features:
High-performance, Low-power AVR 8-bit Microcontroller
Advanced RISC Architecture
131 Powerful Instructions - Most Single Clock Cycle Execution
32 x 8 General Purpose Working Registers
Up to 16 MIPS Throughput at 16MHz
Fully Static Operation
On-chip 2-cycle Multipl..
Product description:
For Robot control, remote control. Information collection.
Using I2C (TWI) communication protocol, which greatly simplifies the communication process of NRF24L01.
Users do not need to understand the complicated NRF24L01 communication process which greatly impro..
FEATURES:
High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
131 Powerful Instructions – Most Single Clock Cycle Execution
32 x 8 General Purpose Working Registers
Fully Static Operation
Up to 20 MIPS Throughput at 20 MHz
On-chip 2-cycle Multi..
Features:
28-pin AVR Microcontroller
Flash Program Memory: 8 kbytes
EEPROM Data Memory: 512 bytes
SRAM Data Memory: 1 kbytes
I/O Pins: 23
Timers: Two 8-bit / One 16-bit
A/D Converter: 10-bit Six Channel
PWM: Three Channels
RTC: Yes with Separate Oscillator
MSSP: SPI and I²C..
DESCRIPTION:
This tiny 5-mega pixel camera module is capable of 1080p video and still images, and connects directly to your Raspberry Pi. It makes it perfect for mobile or other applications, because of the size and weight. The sensor has a native resolution of 5 megapixel, and has a fixed focus ..
DESCRIPTION:
For Arduino MEGA / MEGA2560 ProtoShield prototype expansion board with Immersion Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier.
SOP28 SMD component package to be more handy with Arduino electronics enthusiasts will not be ..
Product description:
The Arduino MEGA has many more I/O pins (54 Digital pins and 16 Analog pins)than a standard Arduino. This shield also has connectors specifically for some external devices like an SD Card, Radio communications (Bluetooth and others). It also has an option to po..
DESCRIPTION:
MinimOSDis a super-tiny board designed by 3DRobotics. It's all you need to get OSD telemetry data from ArduPilot Mega. Just connect your FPV camera and a video link and you're ready to fly with instruments on screen.
It's intended to be a dedicated APM telemetry video output. ..
Product description:
Cable Not included, Need cable, Buy Here
The Nano is an ultra-small simple I/O platform based on open source code.
It has a big advantage in size compared to the old USB version.
Micro-controller : Atmel ATmega328
Operating V..
Product description:
Main changes from the older version:
Add two rows of the holes for the pins. So it can be connected with normal Dupont line.
Add 3 rows of the holes for wiring.
Change the in-line package of ATMEGA32..
Performance description:
Digital I/O Digital input/output terminal, a total of 0 ~ 13.
Analog I/O Analog input/output terminal, a total of 0 ~ 5.
Support the ISP download function.
The input voltage: when connected to the computer USB without external power supply, external power supply 5 v ~ ..
Technical Specification
Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage 7-12V (recommended power 7.5 V or 9 V.)
Digital I/O Pins 54 (of which 15 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
F..