DESCRIPTION:
Balanced output line using 20AWG multi-beach silicone wire.
Main output line using high-quality 14AWG multi-beach silicone wire.
XT60 plug with a security plug silicone cap.
high-quality AMASS output plug.
Thicker PCB copper, can pass 30A of charge ..
DESCRIPTION:
High Quality 2S-6S Lipo Parallel Charging Board Charger Plate T Plug for Imax B6 B6AC B8 6in1
Our parallel charge boards allow you to charge and balance up to six battery packs simultaneously without a clutter of wires.
Constructed from the highest quality material..
DESCRIPTION:
LiPo batteries are a great way to power your projects. They're small, lightweight, and pack a pretty good punch for their size. Unfortunately, even the best batteries eventually run low on power and when they do it's often unexpected (and at the worst time). Don't be caught by surpri..
The MAX232 is an IC, that converts signals from an RS-232 serial port to signals suitable for use in TTL compatible digital logic circuits. The MAX232 is a dual driver/receiver and typically converts the RX, TX, CTS and RTS signals.
The drivers provide RS-232 voltage level outputs (approx. ± 7...
This product is widely used in radio modifications, cell phone Flash, XBOX360 Flash detection, GPS, car, DVD Flash, HDD repair, set-top box upgrade.
Can be used to download MCU types:
STC single-chip microcomputer
STM32 microcontroller
NXP microcontroller
Renesas MCU
NEC MCU
Com..
DESCRIPTION:
1 on-board MAX485 chip is a low power consumption for RS-485 communications, Slew-Rate Transceiver
2 the board received 5.08 (mm) pitch 2P terminal, convenient RS-485 communication wiring
3 the chip..
Features:
Low Power Transceiver for RS-485 and RS-422 Communications
Half-Duplex Operation
No Slew Rate Limitation, Operation up to 2.5Mbps
Up to 32 Receivers on the Bus
Quiescent Current 300µA
Thermal Shutdown
..
DESCRIPTION:
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple.
FEATURES:
Operating voltage: 3. 0~5. 5V.
Internal integrated cold junction compensation circuit.
With a simple three serial SPI interface.
Temperature signal can ..
Product description:
MAX7219 is an integrated serial input / output common-Cathode display drivers , which connects the microprocessor 7-segment digital LED display with 8 digits , bar graph can also be connected monitor or 64 separate LED. On type B BCD encoder includes ..
MAX7219 MAX7219CNG LED DOT MATRIX DIGIT DISPLAY DRIVER
When you need some help driving a lot of LEDs, the MAX7219 is the best friend you could hope for. Many of us know that if you want to control a lot of LEDs, you'll want to use multiplexing, a technique that lets you control 64 LEDs (say) with..
DESCRIPTION:
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
Dimensions: 12.8X12.8X1.3cm/
Fixing screws with 64 holes with a diameter 3mm
Module with input and output int..
DESCRIPTION:
1.Electrical characteristics
The maximum output current: 2 a
The input voltage: 2 v ~ 24 v
The maximum output voltage: 28 v
Efficiency: ≤93%
2.Mechanical properties
product size: 36 mm * 17 mm * 14 mm
3.Method of use
The module of the IN+ and -..
DESCRIPTION:
100% Brand New and High Build Quality
A converter board for electrical levels
Max. Baud Rate: No more than 120kbps
SPECIFICATION:
Dimension: 15.875mm x 9.398mm x 2.54mm
Net weight: - 5g
Chip Model: MAX3232CSE
..
DESCRIPTION:
The 127 couples, 40mm x 40mm size module is a single stage module which is designed for cooling and heating up to 90°C applications.
TECHNICAL SPECIFICATIONS:
Size 40x40x3.4mm (WxDxH)
Imax 5A
Umax 15.4V
Qmax (ΔT =0) 42.5W
ΔT max. = 65°C
FEAT..
TECHNICAL SPECIFICATIONS:
Size 40x40x3.75mm(WxDxH)
Imax 6A
Umax 12V
Qmx(ΔT=0) 60-71W
ΔT max =83° C
FEATURES:
No moving part, no noise
Compact Structure, small in size, light in weight
ROHS Compliant
Exceptionally reliable in quality, high performance
..
FEATURES:
Precise temperature control.
Solid state, vibration free, noise-free.
Simple to install and operate.
Each device is fully inspected and tested.
Fitted with 14cm insulated leads .
Perimeter sealer for moisture protection.
This device mus..
DESCRIPTION:
100% Brand New and high quality
HYPERION EOS CHARGER
Temperature Sensor Cable
Temp Sensor for any Hyperion Charger with a Temp Sensor Port!
SPECIFICATION:
Size:325mm(Length)
Net weight:6g
Color:Black+White+Red
..
DESCRIPTION:
This is a simple and compact LiPoly balance charger for 2~3s batteries. It features built in JST-XH balance plug ports and 3 LEDs to indicate charge status.
Comes with Inbuilt Power Supply. So you can straightaway plug it into the wall outlet. It's an ideal charger to charge your ..
iMAX B6 DIGITAL RC Lipo NiMH BATTERY BALANCE CHARGER [COPY]
Note: This is a clone of IMAX B6 But With High quality and same Functionality Power supply not included.
IMAX B6 is the new intelligent multifunction charger which can charge and discharge for Lion, LiPo, LiFe (..