Search Criteria
Products meeting the search criteria
Out Of Stock
Brand: xcluma
Model: BE-001332
DESCRIPTION:
Color: Yellow+Blue 4pin
FEATURES:
Size: 0.96'' inch
Pixels: 128X64
Driver IC: SSD1306
Viewing angle: > 160 degrees
Power Supply: 3.3V to 5V
Volume: 27MM * 27MM * 4.1MM
Communication: IIC, only two I / O ports
No font: The software takes word ..
Rs188.00
Brand: xcluma
Model: BE-000153
DESCRIPTION:
100% brand new
Use for 1-8s Lipl/Li-ion/LiMn/Li-Fe
Voltage detection pricision: 0.01V
..
Rs175.00
Hot
Brand: xcluma
Model: BE-000414
DESCRIPTION:
LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays.
This is a very standard green LED. The lens is 3mm in diameter, and is diffused.
FEATURES:
2.0-2.4 VDC forward drop
Max current: 20mA
Suggested ..
Rs1.00
Hot
Brand: xcluma
Model: BE-000411
DESCRIPTION:
5mm diameter
2.2-2.5V Forward Voltage, at 20mA current
Color: Yellow
Quantity: 1 piece of LED
..
Rs1.00
Hot
Brand: xcluma
Model: BE-001366
DESCRIPTION:
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chip..
Rs345.00
Out Of Stock
Brand: xcluma
Model: BE-001367
DESCRIPTION:
ESP-32S Wifi Bluetooth combo module is ultra high performance and ultra low-power consumption Wi-Fi and Bluetooth combo wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S integrates dual-core processor, 448 KByte ROM,520 KByte SRAM,16 KByte SRAM in RTC, 802.11 b/g/n/e/I Wi-F..
Rs551.00
Brand: xcluma
Model: BE-001370
DESCRIPTION:
ESP32 is a complete,small form factor(SFF)802.11 b/g/n/e/i(2.4GHz)WLAN plus BT4.2combo solution optimized for low-power,mobile consumer electronics,wearable and Internet of Things(IOT) devices.ESP32 integrates all WLAN and BT functionality in a single package to support a l..
Rs283.00
Brand: xcluma
Model: BE-000674
The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current..
Rs6.00
Out Of Stock
Brand: xcluma
Model: BE-001328
DESCRIPTION:
Low power small volume fast start and high cost performance!
HLK-M30 is a new low-cost embedded electronic UART-WIFI (serial port - wireless network) modular. This product converts between the user's serial port wireless network (wifi) to achieve the network standard built-i..
Rs1,230.00
Out Of Stock
Brand: xcluma
Model: BE-001447
FEATURES:
Onboard 'slot, support a variety of power supply.
Lead all IO, work user function extension.
Onboard a CP2102, work was debugging by the user.
Onboard LED the and keys, compatible with the official allocation of resources, work for the user operation.
NRF51822 is an u..
Rs701.00
Brand: xcluma
Model: BE-000294
DESCRIPTION:
The CJMCU-SX1509 can leverage your I2C interface for 16 extra channels of GPIO. And that’s not all! This handy device also contains a fully programmable LED driver and a keypad scanning engine which enables continuous keypad monitoring of up to 64 keys! Since the I/O banks can operat..
Rs323.00
Brand: xcluma
Model: BE-000716
DESCRIPTION:
You just need to connect to Arduino interrupt pin 2, and can measure the number of PWM pulse/interrupt per unit of time. The water flow would be directly proportional to the number of measured pulses.
Please scroll below for more details of the product
Water flow sensor can be..
Rs151.00
Brand: xcluma
Model: BE-000020
Product description:
This is a 5V 2-Channel Relay interface board,Be able to control various appliances, and other equipments with large current.It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
..
Rs60.00
Showing 1 to 13 of 13 (1 Pages)