Search Criteria
Products meeting the search criteria
Brand: xcluma
Model: BE-000201
DESCRIPTION:
Arduino dedicated Relay Shield, 4-way 3A relay control, xbee wireless module.
Independent external power supply and optocoupler isolation, effectively avoid electromagnetic interference devices charged.
SPECIFICATIONS:
External power supply voltage: 7 ~ 12..
Rs663.00
Brand: xcluma
Model: BE-000333
DESCRIPTION:
10 Pin to 6 Pin Adapter Board for AVRISP MKII USBASP STK500 High Quality
..
Rs34.00
Out Of Stock
Brand: xcluma
Model: BE-000376
DESCRIPTION:
Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe
Specification:
Voltage detection precision: +_0.01V.
Unit voltage display range: 0.5~4.5V
Total voltage display range: 0.5~36V
Low voltage alarm mode for 2-8S
1S test mode voltage range: 4-15V
Alarm set value range:OFF~2.7~3.8V
Size: 40mm x..
Rs113.00
Brand: xcluma
Model: BE-000160
DESCRIPTION:
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V ..
Rs21.00
Brand: xcluma
Model: BE-000049
ackage Include:
1x ACTIVE BUZZER DRIVER MODULE
Product description:
Feature:
Module using S8550 transistor drive
Operating Voltage 3.3V-5V
With fixed bolt hole for easy installation ..
Rs24.00
Brand: xcluma
Model: BE-000344
DESCRIPTION:
1. Working voltage: 5 VDC.
2. Working current: 10-15 mA.
3. Drive current: 100 mA.
4. Induction distance: 3-50 cm.
5. Size: 17 x 45 mm.
Connection: red take 5 V. green meet GND. yellow line output.
Through the sensors to adjust the knob on the back. induction ..
Rs137.00
Brand: xcluma
Model: BE-000002
Product description:
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
It has total of four slots, can drive four A4988 stepper motor. Each stepper motor only need two IO ports. In other words, six IO ports can be well managed..
Rs101.00
Out Of Stock
Brand: xcluma
Model: BE-000966
DESCRIPTION:
This is a J-Link JTAG converter, it is a great item for your ARM Emulator . It also supports MINI2440, TQ2440 and other New Version and Popular ARM board It includes SWD 6PIN interface and SWD 4PIN port.
It is also compatible with sockets as follow :
20PIN Pitch = 2.54MM
20P..
Rs105.00
Brand: xcluma
Model: BE-000107
Package Include:
1X BLUETOOTH XBee SHIELD- V03
Product description:
Stackable design, easy to plug into ARDUINO development board;
Coupled with Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wir..
Rs155.00
Brand: xcluma
Model: BE-000324
DESCRIPTION:
The lamp brightness can be adjusted by requirement.it is very to operate.
It can touch in medium protection.such glass.acrylic.plastic.ceramics and so on.which is very safe.
Wide application of voltage range.you can choose arbitrarily between 2.4V to 4.5V.
Simple applied circuit.l..
Rs53.00
Out Of Stock
Brand: xcluma
Model: BE-000088
DESCRIPTION:
Module Properties: non-isolated step-up module (BOOST)
input voltage: 1-5V , Output voltage: 5.1-5 .2 V ,Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)
Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency..
Rs33.00
Out Of Stock
Brand: xcluma
Model: BE-000320
DESCRIPTION:
100% brand new and high quality
Compact design. high efficiency. easy installation and use.
With overload/over-current/over temperature/short circuit protection
Wildly used for the car corder. car navigation. car audio. car radio. bus LED display. taxi LED screens etc.
Model: CPT..
Rs183.00
Out Of Stock
Brand: xcluma
Model: BE-000300
Description:
Superior sound quality.Onboard 2W amplifier(5V power of up to 3W) is directly connected to the speaker (recommendation 4 ω 3W speakers),3.5mm gold plated headphone jack can connect with headphones or external audio.
With a MicroUSB port.Through the mobile phone data ..
Rs220.00
Brand: xcluma
Model: BE-000127
Product description:
ProtoShield prototype expansion board with two buttons and two LED circuit can be used directly,
all of the pins and the power leads are ve..
Rs69.00
Out Of Stock
Brand: xcluma
Model: BE-000332
DESCRIPTION:
1. supports Google Android ADK. support Android phones: G1. Nexus One. Nexus S. Motorola Droid X
2. (phone system needs to be upgraded to Android 2.3.4. you need to upgrade to the Tablet PC Android 3.1)
3. Provide compiled APK installation package source files and ADK
4. com..
Rs899.00
Brand: xcluma
Model: BE-000163
DESCRIPTION:
Support devices with RS485 interface: surveillance cameras, video capture device, fingerprint attendance machine, PBX, CNC machine, microcontroller, etc.
Specification:
Standard: USB2.0 standard, backward compatible, in line with the standard RS485
Directio..
Rs159.00
Showing 1 to 16 of 16 (1 Pages)