DESCRIPTION:
Color: Yellow+Blue 4pin
FEATURES:
Size: 0.96'' inch
Pixels: 128X64
Driver IC: SSD1306
Viewing angle: > 160 degrees
Power Supply: 3.3V to 5V
Volume: 27MM * 27MM * 4.1MM
Communication: IIC, only two I / O ports
No font: The software takes word ..
DESCRIPTION:
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V ..
Product Description:
100% Brand New and High Quality
Chip: AT24C02
Size: 1.9 x1.1 (CM)
Storage tool for EEPROM with I2C interface
Main resource: AT24CXX,12C pin header
Chip: AT24C02..
Features:
Low-power CMOS technology:
Maximum write current 5 mA at 5.5V
Maximum read current 400 μA at 5.5V
Standby current 100 nA, typical at 5.5V
2-wire serial interface bus, I2C™ compatible
Cascadable for up to eight devices
Self-timed erase/write cycle
128..
DESCRIPTION:
Its heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel, controlled by an Atmel ATmega8L which handles the I2C communication with for example an Arduino.
Both motors can be driven simultaneously while set to a different speed and direction.
..
DESCRIPTION:
CJMCU-219 is a module with the I2C interface of zero drift and bi-directional current/power monitoring and control integrated circuit (IC), further expand the TI energy-saving electronic products.INA219 has the industry's highest precision and the small size, not only can monitor the..
DESCRIPTION:
LiPo batteries are a great way to power your projects. They're small, lightweight, and pack a pretty good punch for their size. Unfortunately, even the best batteries eventually run low on power and when they do it's often unexpected (and at the worst time). Don't be caught by surpri..
DESCRIPTION:
100% brand new and high quality.
3-Axis, Digital Magnetometer with I2C interface
The MAG3110 Board is a development tool for measuring magnetic fields. It features a high sensitive digital magnetometer MAG3110 onboard, which provides 3-Axis ge..
DESCRIPTION:
This is a breakout board for Freescale's MPR121QR2 The MPR121 is a capacitive touch sensor controller driven by an I2C interface The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode The MPR121 also features eight LED driving... pins. Wh..
DESCRIPTION:
The PCF8563 RTC Board provides the real-time clock/calendar function, which can be driven by a battery on board and works independently even when the MCU is turned off.
Low-cost, extremely accurate I2C real-time clock (RTC)
More steady and precise than DS1302 or DS1307
Suppo..
DESCRIPTION:
The IC allows the user to expand up to 16 I/O using only two I/O for control. The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins. Checkout the datasheet for more info.
FEATURES:
16 individ..