Search Criteria
Products meeting the search criteria
Brand: xcluma
Model: BE-000793
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 1
Color: Normally Light..
Rs20.00
Brand: xcluma
Model: BE-000799
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 10
Color: Normally Ligh..
Rs25.00
Brand: xcluma
Model: BE-000701
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 11
Color: Normally Ligh..
Rs25.00
Brand: xcluma
Model: BE-000488
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 2
Color: Normally Light..
Rs15.00
Brand: xcluma
Model: BE-000794
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 3
Color: Normally Light..
Rs22.00
Brand: xcluma
Model: BE-000481
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 4
Color: Normally Light..
Rs20.00
Brand: xcluma
Model: BE-000795
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 5
Color: Normally Light..
Rs25.00
Brand: xcluma
Model: BE-000796
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 6
Color: Normally Light..
Rs25.00
Out Of Stock
Brand: xcluma
Model: BE-000797
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 7
Color: Normally Light..
Rs25.00
Brand: xcluma
Model: BE-000483
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 8
Color: Normally Light..
Rs25.00
Out Of Stock
Brand: xcluma
Model: BE-000798
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 9
Color: Normally Light..
Rs25.00
Brand: xcluma
Model: BE-000601
The ATmega16A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It has 16K bytes of In-System Programmable Flash Program memory with Read-While-Write capabilities, 512 bytes EEPROM, 1K byte SRAM. By executing powerful instructions in a single clock cycle, the ATm..
Rs279.00
Brand: xcluma
Model: BE-000593
DESCRIPTION:
Atmel ATTINY45-20PU is tiny little 8pin DIP microcontroller, packed with high performance, low power 8 bit Advanced RISC Architecture. Its operational Voltage limit is 2.7V to 5.5V. It has 20 MHz CPU Clock, 6 general purpose I/O lines, 4KB ISP flash memory, 256B EEPROM, 256-Byte SR..
Rs164.00
Brand: xcluma
Model: BE-000525
The CA3140 is integrated circuit operational amplifiers that combine the advantages of high voltage PMOS transistors with high voltage bipolar transistors on a single monolithic chip.
The CA3140 BiMOS operational amplifiers feature gate protected MOSFET (PMOS) transistors in the input cir..
Rs49.00
Brand: xcluma
Model: BE-000880
One side of the adapter board is SOP816 (1.27mm pitch) to DIP16 (2.54mm pitch), the other side is SSOP16 / TSSOP16 (0.65mm pitch) to DIP16 (2.54mm pitch). It is dual-side, unique design which can be compatible with more ICs.The 1x8P gold-plated pin header is durable, easy on the tin. After solde..
Rs25.00
Brand: xcluma
Model: BE-001539
DESCRIPTION:
Pitch 0.5mm Suitable for QFN48 QFP48 turn DIP48
Pitch 0.5mm Suitable for QFN44 QFP44 turn DIP44
..
Rs74.00
Out Of Stock
Brand: xcluma
Model: BE-000505
FEATURES:
Serial Input/Output via I²C Bus
Address by 3 Hardware Address Pins
Sampling Rate Given by I²C Bus Speed
4 Analog Inputs Programmable as Single Ended or Differential Inputs
Auto-Incremented Channel Selection
..
Rs139.00
Out Of Stock
Brand: xcluma
Model: BE-001541
DESCRIPTION:
1.QFN32/QFN40 conversion board
2.Pin Space:0.5mm
..
Rs35.00
Brand: xcluma
Model: BE-000491
Specifications:
Name: TQFP (32,44,48,64,84,100) pins to DIP adapter plate (pin spacing 0.8mm / 0.5mm)
Size: 38 x 46 mm
..
Rs74.00
Brand: xcluma
Model: BE-001547
DESCRIPTION:
SMT to DIP 0805 0603 0402 SMT to DIP Capacitor Resistance LED SMT transfer board.
..
Rs36.00
Hot
Brand: xcluma
Model: BE-000190
DESCRIPTION:
High quality and durable
programmer(1.27 Pitch) and all SOP8 narrow chips
Suitable for ALL-11 Series,ALL-100GANG , LT-48 Series, Super PRO Series, TOP Series(1.27pitch) etc.
Support Chips: 24CXX, 93CXX, 25 Series and all SOP8 narrow chips
Size: Approx.2.4*2.2.2c..
Rs188.00
Out Of Stock
Brand: xcluma
Model: BE-001535
DESCRIPTION:
Color: Green
Item: Converter PCB Board
Feature: Double Side
Size: 15.6 x 21mm
SMD Lead Pitch: 0.65 mm / 1.27 mm.
SOP16 SSOP16 TSSOP16 adapter plate.
One side is suitable for the pin spacing of 0.65 mm (compatible SSOP4 ~ 16 feet);
The other s..
Rs36.00
