Search Criteria
Products meeting the search criteria
Brand: xcluma
Model: BE-000114
Package Include:
1X ATMEL ATmega328 CH340G BOARD with USB CABLE Free
Product description:
Main changes from the older version:
Add two rows of the holes for the pins. So it can be connected with normal Dupont..
Rs489.00
Hot
Brand: xcluma
Model: BE-000014
Package Include:
1X ATMEGA328P 5V/16M + 3 x sets of header pins
Product description:
Mini Pro is a micro-controller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs),
&nb..
Rs232.00
Brand: xcluma
Model: BE-000389
DESCRIPTION:
Microcontroller chip: ATtiny13A
Mini USB interface or pin power supply.
All the IO port leads and marked.
On-board ISP interface.
Reliable reset circuit.
..
Rs375.00
Brand: xcluma
Model: BE-001301
FEATURES:
Support for the Arduino IDE 1.0+ (OSX / Win / Linux)
Power via USB or External Source - 5V or 7 - 35V (automatic selection)
On-board 500ma 5V Regulator
Built-in USB (and serial debugging)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, othe..
Rs278.00
Brand: xcluma
Model: BE-000968
DESCRIPTION:
nRF51822 is one for ultra-low power wireless applications (ULP wirelesss applications) to create a multi-protocol single-chip solution.
It integrates the leading Nordic wireless transmitter supports Bluetooth (R) low energy and a dedicated 2.4GHz protocol stack.
The basic situation..
Rs212.00
Out Of Stock
Brand: xcluma
Model: BE-000953
DESCRIPTION:
Crystal X1 is a standard 12MHz, USB host USB device is higher than the required frequency accuracy, X1 error requirement is less than 0.4 ‰, ordinary 12MHz crystal basically meet the requirements. It is strongly recommended to shorten the length of the relevant lead to reduce interfe..
Rs1,189.00
Hot
Hot
Brand: xcluma
Model: BE-001366
DESCRIPTION:
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chip..
Rs345.00
Brand: xcluma
Model: BE-000228
DESCRIPTION:
This is a support cloud intelligent hardware development kit, the history of the most simple and most cost-effective iot development board, don't need you to understand the knowledge of the network, the TCP/IP and other complex, as long as you will C language, can use emc's wit cloud..
Rs354.00
Brand: xcluma
Model: BE-001314
DESCRIPTION:
After modules such as VoCore, AsiaRF AWM002, and ESP8622, here’s come xWifi. This module is based on Mediatek MT7681 SoC which includes a TCP/IP stack like Espressif ESP8622 or TI CC3300, so it won’t run OpenWRT like VoCore or AsiaRF modules. The module only consu..
Rs468.00
Out Of Stock
Brand: xcluma
Model: BE-000221
DESCRIPTION:
NANO multi-purpose expansion board for NANO tailored a sensor expansion board to solve the NANO when connecting a variety of sensor wiring confusing problem , as you develop works of the weapon.
(1)IO port leads all digital and analog IO ports, each IO port has p..
Rs89.00
Out Of Stock
Brand: xcluma
Model: BE-000369
DESCRIPTION:
* 2.4G wireless receiver integrated design
* DPI Adjustable Touchpad
* 90-degree flip Touchpad
* Built-in detachable & rechargeable li-ion battery (810mA)
* Innovative design of the Navigation keys
* Windows Multime..
Rs429.00
Out Of Stock
Brand: xcluma
Model: BE-000363
OpenPilot CC3D Flight Controller STM32 32-bit Copter Control Board For Rc Model With Protective Case
DESCRIPTION:
Features:
The CC3D provides a crisp feel when flying tricopters, for quads, for hexas, for octocopters, and even fixed wing planes.
Powerful for STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
3-axis high-performance MEMs gyros and 3-axis high-perform..
Rs2,400.00
Brand: xcluma
Model: BE-000309
Product description:
You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs! What now?
Usi..
Rs389.00
Out Of Stock
Brand: xcluma
Model: BE-001445
DESCRIPTION:
28 PIN PIC16F72 chip as the PIC Microchip Development Board. PIC16F72 has the following resources: 25 I/O port, 12 interrupt, 11 channel 8 AD (Analog-Digital) conversion, two 8-bit timer, a 16-bit timer, 128 bytes SRAM, addressable universal synchronous/asynchronous transceiver, 2048..
Rs193.00
Brand: xcluma
Model: BE-000267
DESCRIPTION:
Brand new and high quality.
KY-040 rotary encoder module for Arduino.
Working voltage: 5V.
Pulse number per revolution: 20.
Size: 2cm x 3cm x 3cm.
..
Rs43.00
Out Of Stock
Brand: xcluma
Model: BE-000985
DESCRIPTION:
100% Brand New and high quality
The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones.
The GPRS Shield provides you a way to communicate using the GSM cell phone network.
The shield allows you to achieve SMS, MMS, GPRS and Aud..
Rs607.00
Out Of Stock
Brand: xcluma
Model: BE-000361
STM32 NUCLEO-F103RB STM32F1 STM32F103 STM32 Development Board supports for Arduino, Embedded ST-LINK
DESCRIPTION:
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino connectivity support and ST Morph..
Rs1,425.00
Out Of Stock
Brand: xcluma
Model: BE-000360
DESCRIPTION:
Model: STM32F103C8T6.
Core: ARM 32 Cortex-M3 CPU.
Debug mode: SWD.
72MHz work frequency.
64K flash memory, 20K SRAM.
2.0-3.6V power, I/O.
Reset(POR/PDR).
4-16MHz crystal.
On-board Mini USB interface, you can give the board power supply and USB communication.
Size:5.3cm x 2.2..
Rs223.00
Out Of Stock
Brand: xcluma
Model: BE-000226
DESCRIPTION:
Hardware Features:
STM32F103RCT6, TQFP64, FLASH: 256K, RAM: 48K
Standard JTAG / SWD download port
Power Indicator
Two Status LED lights
SPI FLASH chip, W25X16, capacity of 2M bytes
OLED screen module interface
MiniUSB interface, power supply to..
Rs1,099.00
Brand: xcluma
Model: BE-000225
DESCRIPTION:
STM32F103RCT6,TQFP64,FLASH:256K,RAM:48K
the two state indicating lamp JTAG/SWD A
chip
capacity
byte SPI FLASH A W25X16 screen module interface 2M one
byte OLEDCan give the system version o..
Rs2,571.00
Out Of Stock
Brand: xcluma
Model: BE-001448
STM8S Core Board of the Highlights:
The development board using Micro USB cable supply, compatible with smart phone lines, data lines is simple and easy to get, but not USB Mini line-powered
Low price, user-friendly design, a full set of data, allowing you to save money, save time, effort, w..
Rs156.00
Brand: xcluma
Model: BE-000299
DESCRIPTION:
Based on the ESP-8266EX.
Arduino Compatible, you can use it on Ard uino IDE.
11 Digital I/O pins
1 Analog Input pin
OTA -- Wireless Upload(Program)
On board switching power supply -- Max 24V input, 5V 1A output
..
Rs249.00