DESCRIPTION:
Wireless module operating voltage is generally 3.3v, while the ordinary 51 microcontroller 5v, this module is easy to shop wireless module with 51 single system board used in conjunction.
This module can be any one of 51 shop is directly connected to the system board, easy to use.
..
DESCRIPTION:
Latest version V2.1 Vgate Mini ELM327 bluetooth is a newly developed wireless scan tool.Supports OBD-II protocols.
Bluetooth connection, no Batteries, Cables, or Switches.
Wirele..
DESCRIPTION:
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all ty..
DESCRIPTION:
0.96-inch OLED module features
high resolution: 128X64 (and 12864LCD the same resolution. but the OLED screen more pixels per unit area)
super wide viewing angle: more than 160 ° (maximum viewing angle display a screen)3. ultra-low power consumption: normal display 0.06W (far..
DESCRIPTION:
Color: Yellow+Blue 4pin
FEATURES:
Size: 0.96'' inch
Pixels: 128X64
Driver IC: SSD1306
Viewing angle: > 160 degrees
Power Supply: 3.3V to 5V
Volume: 27MM * 27MM * 4.1MM
Communication: IIC, only two I / O ports
No font: The software takes word ..
Product description:
This module is in line with international safety standard, control areas and load area have the isolation groove.
Have power and relay operation instructions, connect the light will on, disconnect the light will off.
When signal i..
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 1
Color: Normally Light..
DESCRIPTION:
1.4 HDMI cables are the most recent version of the HDMI cable. The 1.4 has a lot off new advantage over the old version 1.3. If you don't want to change you HDMI cable in the future might as well buy the version that you will need. The 1.4 is made for 3D home theatre, high and gaming..
DESCRIPTION:
This is a 5x2 line pin header in a box package. Notch marking is for pin 1. It can be directly soldered on PCB. 10 pin FRC Cable Connector can be used to connect it with other devices. Pin distance is 2.54 mm (0.1 inch).
..
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 10
Color: Normally Ligh..
DESCRIPTION:
This 10 segment LED bar graph has many uses. With a compact footprint and a simple hookup, they are easy for prototyping or use in finished products. Essentially, there are 10 individual red or green LEDs housed together.
Applications:
Audio equipment
Instrument panels..
DESCRIPTION:
A DC motor with gear box attached to the shaft, which is mechanically commutated electric motor powered from direct current (DC). Generally used in DIY projects, Battery operated toys, Radio controlled vehicles, Robotic projects etc.
SPECIFICATIONS:
RPM: 100
Oper..
SPECIFICATION:
Voltage: AC 220V
Maximum power: 10000W (connected resistive load, 220VAC) Practically Use on 50% capacity means 5000W
Voltage regulation: AC 10V to 220VAC
Dimension: 130 x 60 x 47mm
Rated current: 25A MAX 45A
For electric furnace, water heater, lamps, small motor,..
Product Description:
HC-SR04 ultrasonic module can offer non-contact distance sensing function, the range of which is 2cm—400cm., and the range accuracy is up to 2mm; the module includes ultrasonic transmitter, receiver and control circuit.
The basic operation principle is b..