DESCRIPTION:
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V ..
DESCRIPTION:
DIY Mobile Power Supply, 5V output for charging Phone, MP3, MP4, PSP, etc
Modules nature: non-isolated Buck
With Overcurrent Protection
Rectification: Non-synchronous rectification
(Note: Please connect right as the printed : N-,IN+,OUT-,OUT+ ,or else the Module will be bu..
DESCRIPTION:
super current carrying capacity (maximum 8 A), to provide the strong power to your device!
Tight layout, limited space for you to make the biggest concessions
Additional radiator, no longer worry about equipment and higher temperature
SCOPE OF APPLICATION:
Can be us..
Performance and highlights:
Voltmeter wide range DC4.5 ~ 40V.
5V/2A output current (Only when the input voltage is 6.5 ~ 40V, it can output 5V).
A key ("Output Enable" button) switch USB output, a key ("low-power" button) to enter the ultra-low power.
Voltmeter can be artificial..
DESCRIPTION:
100% brand new and high quality
Use a dedicated benchmark IC, and high-precision current sensing resistor,
High output current, the max output current can reach 9A.
Low output ripple , high frequency capacitor reduces output ripple.
Suitable for LED driver.
SPECIFIC..
DESCRIPTION:
Raspberry Pi comes with HDMI Port and does not have VGA port to connect to conventional PC monitor. This converter helps in using the existing monitors as display for Raspberry Pi.
You can connect any VGA Monitor (including old CRT Monitors) to Raspberry Pi using HDMI to VGA..
DESCRIPTION:
NEW IDE HDD to SATA Serial ATA Converter Adapter
This Adapter Does it All , SATA Hard Drive To IDE Converter or IDE Drive to SATA Host Converter.This is a Bi-Direction converter for serial and parallel ATA translation .
it includes the Serial ATA PHY , Link, Transport and Para..
DESCRIPTION:
Constant Current Constant Voltage (CC CV) DC Buck, or switching non isolated asynchronous CC CV converter. based on the specialised IC LM2596S, output regualtion driven by a TI AOP, leading to a very stable regulation. Sanyo Low ESR Solid Caps, very low output ripple (5-10mV on avera..
DESCRIPTION:
100% Brand New and High Build Quality
A converter board for electrical levels
Max. Baud Rate: No more than 120kbps
SPECIFICATION:
Dimension: 15.875mm x 9.398mm x 2.54mm
Net weight: - 5g
Chip Model: MAX3232CSE
..
DESCRIPTION:
High quality and durable
programmer(1.27 Pitch) and all SOP8 narrow chips
Suitable for ALL-11 Series,ALL-100GANG , LT-48 Series, Super PRO Series, TOP Series(1.27pitch) etc.
Support Chips: 24CXX, 93CXX, 25 Series and all SOP8 narrow chips
Size: Approx.2.4*2.2.2c..
DESCRIPTION:
This USB to serial converter is very useful where there is no physical RS232 port or COM port is available & you want to communicate with a system where only RS232 port is available. This converter presents itself to computer as if it is a COM port. It’s behaviour is as good as a..
SPECIFICATIONS:
Built-in TTL COM PC-PL2303HX Chip
Standard USB type A male and TTL 4 pin connector
Cable length: 1000mm (39 3/8 in)
Simple and Easy way to give USB support to your designs
Available for Linux, Mac, WinCE and Windows (XP, 2003), Vista, Win 7
Black cable-----GND
Green..
DESCRIPTION:
Support devices with RS485 interface: surveillance cameras, video capture device, fingerprint attendance machine, PBX, CNC machine, microcontroller, etc.
Specification:
Standard: USB2.0 standard, backward compatible, in line with the standard RS485
Directio..
FEATURES RS485 ETHERNET SERVER ADAPTER:
Support dhcp, automatically obtain ip address and query through ip address Serial configuration protocol
Support dns function
Web pages through set parameters
Upgrade via firmware network
Automatic mdi / mdix, 10/100 mbps with rj45 port
230.4 k..