SPECIFICATION:
Voltage: AC 220V
Maximum power: 10000W (connected resistive load, 220VAC) Practically Use on 50% capacity means 5000W
Voltage regulation: AC 10V to 220VAC
Dimension: 130 x 60 x 47mm
Rated current: 25A MAX 45A
For electric furnace, water heater, lamps, small motor,..
DESCRIPTION:
5 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps and lanterns, VCD, and other special configuration communications antenna and iron and tools antenna and other electronics products.
Great replac..
DESCRIPTION:
Please note, EM4100 read-only and can not rewrite. If you want to buy can rewrite the tags, you should buy EM4305 chip tags.
APPLICATIONS:
Enterprise / campus card, bus stored value card, express way fees, parking, district management, attendance systems, patrol system, enterpris..
DESCRIPTION:
1.It's a new digital LED countdown display 12v delay module module.
It can be widely used with various control switch places.
2.It can set the delay time,can press "set" buttons.
After setting up, power-up setting value is previous setting delay time
as we set last time (po..
DESCRIPTION:
3 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps and lanterns, VCD, and other special configuration communications
antenna and iron and tools antenna and other electronics products.
Great re..
DESCRIPTION:
3 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps and lanterns, VCD, and other special configuration communications antenna and iron and tools antenna and other electronics products.
Great replac..
DESCRIPTION:
4 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps and lanterns, VCD, and other special configuration communications antenna and iron and tools antenna and other electronics products.
Great replac..
DESCRIPTION:
3 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps and lanterns, VCD, and other special configuration communications antenna and iron and tools antenna and other electronics products.
Great replac..
DESCRIPTION:
motor brush controller for Electric bicycle & scooter
rated voltage: dc 24 v
Current limit : 22A
rated power: 250 w
matching motor: dc brushed motor
Under Voltage Protection: 20V
Wires Interface Definition
Battery :Thick Black (Power Negative) /Thick Re..
SPECIFICATIONS:
Voltage: DC 24V
Wattage: 350W
Undervoltage: 20+/0.5V
Handle: 1-4v
Dimension: 81 x 65 x 38mm/3.18 x 2.56 x 1.5"
Casing material: Aluminium
FEATURES:
* Wiring:
1. black & yellow connector - Brake wire
2. red & black connecotr - Charging port
3. ..
DESCRIPTION:
This is brush motor controller
Suitable Voltage:36v
Match Motor:36V 350W
Protection:31.5±0.5V
Speed Regulator 1-4 V(Throttle )
This item Suitable for electric bike & scooter
WIRING INSTRUCTIONS:
for example, in order to work at least the motor can be connect..
SPECIFICATIONS:
Name: 36V 800W Electric Scooter Bicycle E-bike Brush DC Motor Speed Controller
Material:aluminum
Size: 9cm x 6.5cm x 4cm
Power: 800W
Input: 36V
Undervoltage: 31.5 + -0.5V
Turning: mechanical normally open
Applicable motor: 500W-800W motor
Use of models: ele..
DESCRIPTION:
Speed controller for DC Motor, up to 500w, 48Volts. This controller may be used for replacement of most Electric tricycle and other kinds of electric scooters, E-bikes, or E-ATVs. Check that voltage is compatible, motor is of same or less watts and for similarity in size, shape and c..
DESCRIPTION:
Speed controller for DC Motor, up to 800w, 48Volts. This controller may be used for replacement of most Electric tricycle and other kinds of electric scooters, E-bikes, or E-ATVs. Check that voltage is compatible, motor is of same or less watts and for similarity in size, shape and c..
DESCRIPTION:
Speed controller for DC Motor, up to 500w, 24Volts. This controller may be used for replacement of most Electric tricycle and other kinds of electric scooters, E-bikes, or E-ATVs. Check that voltage is compatible, motor is of same or less watts and for similarity in size, shape and c..
DESCRIPTION:
5 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps and lanterns, VCD, and other special configuration communications antenna and iron and tools antenna and other electronics products.
Great replac..
DESCRIPTION:
5 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps and lanterns, VCD, and other special configuration communications antenna and iron and tools antenna and other electronics products.
Great replac..
Product description:
Detail:
Color: White & Blue
Quantity: 1 pcs
Size(Except bracket): approx. 5 x 4.2 x 3.3 cm (H x L x W)
Input Voltage: AC / DC 12V
Max Load Current: 10A
Frequency..
The ATmega16A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It has 16K bytes of In-System Programmable Flash Program memory with Read-While-Write capabilities, 512 bytes EEPROM, 1K byte SRAM. By executing powerful instructions in a single clock cycle, the ATm..
FEATURES:
Support for the Arduino IDE 1.0+ (OSX / Win / Linux)
Power via USB or External Source - 5V or 7 - 35V (automatic selection)
On-board 500ma 5V Regulator
Built-in USB (and serial debugging)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, othe..
KEY FUNCTIONS:
1. Mode Key: Control dynamic modes.
2. Light Key: Control static colors ,
3. Speed key: Function adjustment key, it can adjust the speed level of the dynamic modes and the brightness level of the static colors
4. Speed ke..
DESCRIPTION:
100% Brand New and High Quality
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).
Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.
The two mo..
DESCRIPTION:
Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.Silm design on transmitter for easy handling!
This radio system uses a high gain a..