Search Criteria
Products meeting the search criteria
Hot
Brand: xcluma
Model: BE-000050
Product Description:
LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications.
A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits.
These modules are preferred ..
Rs79.00
Out Of Stock
Brand: xcluma
Model: BE-001526
DESCRIPTION:
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-curre..
Rs799.00
Out Of Stock
Brand: xcluma
Model: BE-000194
DESCRIPTION:
Use LCD screen as display devices.
SPI interface, maximum limit save the I/O resources.
Specially added five rocker, convenient implementation structures, human-computer interaction interface, all the rest of the analog and digital interface with pin derivatio..
Rs1,149.00
Out Of Stock
Brand: xcluma
Model: BE-000117
DESCRIPTION:
Arduino LCD Keypad Shield
This is a 16x2 LCD and Keypad shield for Arduino Uno, Diecimila, Duemilanove and Freeduino boards.
Blue Backlight with white words
uses 4 Bit Arduino LCD Library
Left, Right, Up, Down and Select buttons
Scr..
Rs179.00
Out Of Stock
Brand: xcluma
Model: BE-000730
FEATURES:
Operating Voltage: 1.8 to 5.5 V.
Flash memory: 16 Kb.
EEPROM: 512 Byte.
SRAM: 1K.
I/O pin: 32 pin.
USART protocol interface.
I2C protocol interface.
SPI protocol interface.
APPLICATIONS:
It is used in Arduino boards.
It can also use in any AVR microcontroll..
Rs139.00
Brand: xcluma
Model: BE-001301
FEATURES:
Support for the Arduino IDE 1.0+ (OSX / Win / Linux)
Power via USB or External Source - 5V or 7 - 35V (automatic selection)
On-board 500ma 5V Regulator
Built-in USB (and serial debugging)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, othe..
Rs278.00
Brand: xcluma
Model: BE-000916
SPECIFICATION:
Address of this module can be changed. By default, the address is '0100011'.
You can connect the solder bridge in the ADDR box. Then the address becomes '1011100'.
You can also do other configurations. For more information, you can refer to the datasheet.
..
Rs69.00
Brand: xcluma
Model: BE-000974
FEATURES:
1.2 HG7881 chip on board motor control.
2.The module can simultaneously drive two DC motors or a 4-wire two-phase stepper motor.
3.The module input voltage: 2.5-12V
4.Each channel has a 800mA continuous output current capability.
5.PCB dimensions: &nb..
Rs73.00
Brand: xcluma
Model: BE-001300
DESCRIPTION:
The Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your board, controlling the speed and direction of each one independently. You can al..
Rs598.00
Brand: xcluma
Model: BE-000267
DESCRIPTION:
Brand new and high quality.
KY-040 rotary encoder module for Arduino.
Working voltage: 5V.
Pulse number per revolution: 20.
Size: 2cm x 3cm x 3cm.
..
Rs43.00
Out Of Stock
Brand: xcluma
Model: BE-000922
FEATURES:
1, the use of imported groove coupler sensor
2, the slot width 5mm.
3, the output status indicator lamp output high, output low lights.
4, block, output high; no shelter, output low.
5, the comparator output signal clean, good waveform, driving ability, than 15mA.
6, the ..
Rs88.00
Brand: xcluma
Model: BE-000941
FEATURES:
Frequency: 125KHZ
- Baud rate: 9600
- Interface: TTL level RS232 format
- Working voltage: DC 5V(+/-5%)
- Working current: <50mA
- Receive distance: 20~50mm
- Working temperature: -10°C~+70°C
- Storage temperature: -20°C~+80°C
- Humidity: 0~95%
- Wiring size: 46*32*3mm
- ..
Rs248.00
Brand: xcluma
Model: BE-001478
SPECIFICATIONS:
Built-in TTL COM PC-PL2303HX Chip
Standard USB type A male and TTL 4 pin connector
Cable length: 1000mm (39 3/8 in)
Simple and Easy way to give USB support to your designs
Available for Linux, Mac, WinCE and Windows (XP, 2003), Vista, Win 7
Black cable-----GND
Green..
Rs143.00
Brand: xcluma
Model: BE-000487
DESCRIPTION:
Connects speed-critical devices, such as external hard drives and smart phones, and peripherals that require a Mini-B connection to your computer
Used for Nano and FTDI Baord
Backwards compatible with USB 1.0
..
Rs50.00
Brand: xcluma
Model: BE-000975
DESCRIPTION:
Voltage input range: DC0-25V
Voltage detection range: DC0.02445V-25V
Voltage Analog Resolution: 0.00489V
DC input connector: Terminal cathode connected to VCC, GND negative pole
Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins
..
Rs16.00
Brand: xcluma
Model: BE-000299
DESCRIPTION:
Based on the ESP-8266EX.
Arduino Compatible, you can use it on Ard uino IDE.
11 Digital I/O pins
1 Analog Input pin
OTA -- Wireless Upload(Program)
On board switching power supply -- Max 24V input, 5V 1A output
..
Rs249.00
Brand: xcluma
Model: BE-001528
DESCRIPTION:
This is a breakout board for the built in WS2812 RGB LED.
The WS2812 is actually an RGB LED with a WS2811 built right into the LED!
All the necessary pins are broken out to 0.1" spaced headers for easy bread-boarding.
Several of these breakouts can be chained together to f..
Rs26.00
Hot
Brand: xcluma
Model: BE-000069
Product description:
Cable Not included, Need cable, Buy Here
The Nano is an ultra-small simple I/O platform based on open source code.
It has a big advantage in size compared to the old USB version.
Micro-controller : Atmel ATmega328
Operating V..
Rs243.00
Brand: xcluma
Model: BE-000165
DESCRIPTION:
12V relay contact capacity 10A 250V, with optocoupler protection.
I / O port driver is active low. Active Low means when Input is low, Relay Will Trigger
Used as a microcontroller development board module can be used as appliance control, can be u..
Rs499.00
Out Of Stock
Brand: xcluma
Model: BE-000132
Technical Specification
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
512KBytes of flash memory for code
A DMA controller, that can relieve the CPU from doing memory intensive tasks.
Specificati..
Rs3,699.00
Brand: xcluma
Model: BE-001524
DESCRIPTION:
Size：21mm*28m
Clock Speed 16 MHz
Operating Voltage 5V DC
Digital I/O Pins 10
PWM Channels 4
Analog Input Channels 5
UART 1
I2C 1
Micro USB 1
Flash Memory 32 KB of which 4KB used by bootloader
SRAM 2.5 KB
EEPROM 1 KB
Microcontroller ATmega32u4
..
Rs805.00
Brand: xcluma
Model: BE-001517
DESCRIPTION:
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It pro..
Rs250.00
Showing 1 to 23 of 23 (1 Pages)