DESCRIPTION:
Analog to digital converters find huge application as an intermediate device to convert the signals from analog to digital form. These digital signals are used for further processing by the digital processors. Various sensors like temperature, pressure, force etc. convert the phys..
DESCRIPTION:
The Analog Test Board is an accessory board includes an onboard Audio Power Amplifier LM386M, and two high-precision adjustable resistor used for adjusting input voltage level (0-3.3V, 2 channel), and a speaker for indicating the output voltage level by sound volume (1 chan..
DESCRIPTION:
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
This chip is like a rotary switch - it internally routes the common pin
(COM in the schematic, SIG on the board)to one of 16 channel pins (CHANxx).
..
Features:
Fast settling output current: 100ns
Full scale error: ±1 LSB
Nonlinearity over temperature: ±0.1%
Full scale current drift: ±10 ppm/°C
High output compliance: -10V to +18V
Complementary current outputs
Interface directly with TTL, CMOS, PMOS and others
2 quadrant wide r..
Features:
8-bit Accuracy
Relative Accuracy: ±0.19%
Fast Settling Output Current: 150ns
Full Scale Error: ±1 LSB
Noninverting Digital Inputs are TTL and CMOS Compatible
Wide Supply Range: ±4.5V to ±18V
Low Power Consumption
..
FEATURES:
1. Size: 11 mm x 27 mm
2. Low power consumption, the power supply voltage of 2.5 V ~ 5 V, working current is microamps level
3. Good linear
4. High sensitivity
5. High stability
6. Wide detection range: 240 nm to 370 nm
7. The big Angle: 130 degrees
8. Schottky type..
DESCRIPTION:
PCF8591 AD / DA chip introduced
PCF8591 is a monolithic. single supply. low-power. 8-bit CMOS data acquisition devices.
PCF8591 has 4 analog inputs. one analog output and a serial I2C bus interface.
PCF8591 of three address pins A0. A1 and A2 can be used for programmin..