Search Criteria
Products meeting the search criteria
Hot
Brand: xcluma
Model: BE-000076
Product description:
Operating voltage: 4.5 ~ 30V (with reverse polarity protection function)
Test voltage: 0 ~ 99.9V
Operating Current: <60mA
Dis..
Rs85.00
Out Of Stock
Brand: xcluma
Model: BE-001333
DESCRIPTION:
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all ty..
Rs629.00
Brand: xcluma
Model: BE-000316
DESCRIPTION:
0.96-inch OLED module features
high resolution: 128X64 (and 12864LCD the same resolution. but the OLED screen more pixels per unit area)
super wide viewing angle: more than 160 ° (maximum viewing angle display a screen)3. ultra-low power consumption: normal display 0.06W (far..
Rs265.00
Out Of Stock
Brand: xcluma
Model: BE-001332
DESCRIPTION:
Color: Yellow+Blue 4pin
FEATURES:
Size: 0.96'' inch
Pixels: 128X64
Driver IC: SSD1306
Viewing angle: > 160 degrees
Power Supply: 3.3V to 5V
Volume: 27MM * 27MM * 4.1MM
Communication: IIC, only two I / O ports
No font: The software takes word ..
Rs188.00
Out Of Stock
Brand: xcluma
Model: BE-000888
DESCRIPTION:
Trimmer/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.
The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to ..
Rs11.00
Brand: xcluma
Model: BE-000887
DESCRIPTION:
Trimmer/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.
The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to ..
Rs11.00
Brand: xcluma
Model: BE-001561
DESCRIPTION:
4 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps and lanterns, VCD, and other special configuration communications antenna and iron and tools antenna and other electronics products.
Great replac..
Rs122.00
Out Of Stock
Hot
Out Of Stock
Brand: xcluma
Model: BE-000987
SPECIFICATION:
Stainless steel sheath and waterproof
Measurement range: -20 to 105 C
Length of wire:1 meter
Size of probe: 5 x 25 mm
Output 2 wires
Type: NTC 10k 1% 3950
measure environmental temperatures using arduino ADC and this 10k NTC LINK
Resistance to temperature conversio..
Rs35.00
Brand: xcluma
Model: BE-000217
DESCRIPTION:
2.4G 2DBI RP SMA Male Antenna Interface WIFI wireless 109MM long omnidirectional antenna
Name: 2.4GHzAntenna
Scope: IEEE802.11 b/g/n WLAN System
Wireless Communication System
Wi-Fi / WiMAX / MIMO System
S.W.R <= ..
Rs196.00
Brand: xcluma
Model: BE-000771
DESCRIPTION:
Low current (max. 200 mA)
Low voltage (max. 15 V)
APPLICATION:
High-speed switching
VHF amplification.
..
Rs16.00
Brand: xcluma
Model: BE-000755
DESCRIPTION:
Collector-Emitter Volt (Vceo): 40V
Collector-Base Volt (Vcbo): 60V
Collector Current (Ic): 0.2A
hfe: 100-300 @ 10mA
Power Dissipation (Ptot): 625mW
Current-Gain-Bandwidth (ftotal): 300MHz
Type: NPN
..
Rs2.00
Brand: xcluma
Model: BE-000754
DESCRIPTION:
Collector-Emitter Volt (Vceo): 40V
Collector-Base Volt (Vcbo): 40V
Collector Current (Ic): 0.2A
hfe: 100-300 @ 10mA
Power Dissipation (Ptot): 625mW
Current-Gain-Bandwidth (ftotal): 250MHz
Type: NPN
..
Rs2.00
Out Of Stock
Brand: xcluma
Model: BE-000033
Product description:
L293 and L293D are quadruple half H Bridge driver having high current capability. It can also be seen as a dual H Bridge driver for driving Motors. L293D can provide currents up to 600mA and L293 can provide currents up to 1A at ..
Rs35.00
Out Of Stock
Brand: xcluma
Model: BE-000792
DESCRIPTION:
Designed for general purpose power amplifier and switching applications. This is an original Toshiba transistor for high power audio amplifiers.
High Fidelity Audio Frequency Amplifier Output
Low Harmonic Distortion
High Safe Operation A
..
Rs156.00
Brand: xcluma
Model: BE-000553
The CD4049 hex buffers are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors. These devices feature logic level conversion using only one supply voltage (VDD). The input signal high level (VIH) can exceed the VDD supply voltage w..
Rs198.00
Brand: xcluma
Model: BE-000565
Category
Integrated Circuits (ICs)
Name
CD4069
Series
4000
Mounting Type
Surface Mount
No. of Pins
16 (DIP)
Feature:
Single 14-stage Ripple Carry Binary Counter
Counter is Advanced One Count..
Rs16.00
Brand: xcluma
Model: BE-000574
Category
Integrated Circuits (ICs)
Name
CD4093, Quad 2-Input NAND Schmitt Trigger
Family
CMOS
Series
4000
Mounting Type
Surface Mount
No. of Pins
14 (DIP)
Feature:
Four Independent ..
Rs16.00
Brand: xcluma
Model: BE-000660
Category
Integrated Circuits (ICs)
Name
CD4099
Series
4000
Mounting Type
Surface Mount
No. of Pins
16 (DIP)
Features:
8-bit Addressable Latch with Three Address Inputs, Data Input and Eight Outputs
Se..
Rs16.00
Out Of Stock
Brand: xcluma
Model: BE-000886
DESCRIPTION:
Trimmer/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.
The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to ..
Rs11.00
Brand: xcluma
Model: BE-000606
The 7493 IC is an up-counter that is capable of operating as a multi-modulus counter.
..
Rs66.00
Brand: xcluma
Model: BE-000515
The MM74C922 CMOS key encoders provide all the necessary logic to fully encode an array of SPST switches. The keyboard scan can be implemented by either an external clock or external capacitor. These encoders also have on-chip pull-up devices which permit switches with up to 50 kΩ on resistance to b..
Rs68.00
Brand: xcluma
Model: BE-000540
The 74HC139; 74HCT139 decodes two binary weighted address inputs (nA0, nA1) to four mutually exclusive outputs (nY0 to nY3).
Each decoder features an enable input (nE).
When nE is HIGH all outputs are forced HIGH.
The enable input can be used as the data input for a 1-to-4 demultiplexer ..
Rs20.00