DESCRIPTION:
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all ty..
DESCRIPTION:
No DC isolated power: for battery, making bluetooth headset.
It can be connected to two phones (the only way: boot automatically chainback last paired phone,the penultimate pairing the phone will need to manually connect).
With a call feature CSR8645 low power consumption the p..
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
DESCRIPTION:
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple.
FEATURES:
Operating voltage: 3. 0~5. 5V.
Internal integrated cold junction compensation circuit.
With a simple three serial SPI interface.
Temperature signal can ..
DESCRIPTION:
The CJMCU-SX1509 can leverage your I2C interface for 16 extra channels of GPIO. And that’s not all! This handy device also contains a fully programmable LED driver and a keypad scanning engine which enables continuous keypad monitoring of up to 64 keys! Since the I/O banks can operat..
FEATURES:
Precise temperature control.
Solid state, vibration free, noise-free.
Simple to install and operate.
Each device is fully inspected and tested.
Fitted with 14cm insulated leads .
Perimeter sealer for moisture protection.
This device mus..
DESCRIPTION:
100% Brand New and high quality
HYPERION EOS CHARGER
Temperature Sensor Cable
Temp Sensor for any Hyperion Charger with a Temp Sensor Port!
SPECIFICATION:
Size:325mm(Length)
Net weight:6g
Color:Black+White+Red
..
DESCRIPTION:
Excellent noise suppression,you will hear any noise without connecting input audio.
Dual-channel stereo,only needed 5V power supply can input 5W+5W power,it can drive 4Ω,8Ω little speaker directly,with large output power,enough energy,superior quality,and left right channel..
DESCRIPTION:
The product has been upgraded, with power input reverse polarity protection
It automatically enters pairing mode after boot, the search display device name: Xpecial Audio
Power supply: 9 ~ 14V DC power supply (12V is recommended to use)
Audio input: Bluetooth stereo inp..
DESCRIPTION:
This amplifier board have two power input End and Two audio input End,you can choose each one!
The amplifier board adopts two imported TPA3116D2 digital amplifier chip as the core,one piece as left and right channel power amplifier,other piece as pre-bridge brive..
DESCRIPTION:
Audio type: TPA3116D2
Input voltage: DC 5-24V
Operating frequency: 20Hz-20Hz
Output type: double track; stereo
Machine size: 84*51*29mm (excluding potentiometer)
FEATURES:
A full range of protection system, with reverse connection of power supply prote..