Product Description:
LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications.
A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits.
These modules are preferred ..
Product Description:
LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications.
A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits.
These modules are preferred ..
The SN74HC244N is an Octal Buffer and Line Driver IC, designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers and bus-oriented receivers and transmitters.This device organized as two 4-bit buffers/drivers with separate output-enable (OE)/..
Features:
Accepts Four Line of BCD Input and Converts this to Seven Open Collector Outputs
Open Collector Outputs require Pull-Up Resistors
Lamp Test Input
Operating Temperature up to 70oC
Standard TTL Switching Voltages
General Description:
The 74LS47 accepts four lines of BCD..
The A3144E(US1881) is an integrated Hall effect latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A h..
DESCRIPTION:
QFP FQFP TQFP 32 44 64 80 100 LQFP SMD To DIP
It's dual-side, one side is applicable to the pitch 0.5mm (compatible with 32~100 pin), on the other size, applicable to the pitch 0.8mm (compatible with 32~64 pin).
Size: 38 x 46mm
..
DESCRIPTION:
IRFZ44 is a n channel MOSFET from International Rectifier. It has maximum VDSS rated at 55V and can handle continuous drain current up to 49Amps at 250C. It has typical power dissipation of 50W.
SPECIFICATIONS:
Maximum VDSS : 55V
Maximum Drain current: 49A at 250C
RDS(on..
FEATURES:
Ultra-compact, harmonic too easy to FCC / CE certification
Penetrating ability SI4432 IC, stable performance
Frequency Range: 433.92M
Sensitivity up to-121dBm
Maximum output power: 20dBm
Data transfer rate :0.123-256kbp..
DESCRIPTION:
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It pro..