Search Criteria
Products meeting the search criteria
Brand: xcluma
Model: BE-000022
Fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
Technical Specifications
The current sensor chips: ACS712ELC-30B
Pin 5V power supply, on-board power indica..
Rs89.00
Out Of Stock
Brand: xcluma
Model: BE-001526
DESCRIPTION:
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-curre..
Rs799.00
Brand: xcluma
Model: BE-001420
DESCRIPTION:
This non-invasive current sensor clamped around the supply line can measure up to 30 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load.
..
Rs375.00
Out Of Stock
Brand: xcluma
Model: BE-001272
SPECIFICATIONS
DC Voltage
Range
200 mV, 2 V, 20 V, 200 V, 600 V
Basic Accuracy
± (0.5 % reading + 4 digits)
Input impedance
1 M Ω
..
Rs479.00
Brand: xcluma
Model: BE-000319
DESCRIPTION:
Technical parameters:
Voltage version:5V
The static current:5mA
Working current:190mA
Trigger current:2-4mA
Module description:
1. 30A relay module. normally open interface maximum load: AC 250V/30A. DV 30V/30A;
2. Optical coupling isolation. driving..
Rs164.00
Showing 1 to 5 of 5 (1 Pages)