Fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
Technical Specifications
The current sensor chips: ACS712ELC-30B
Pin 5V power supply, on-board power indica..
DESCRIPTION:
This non-invasive current sensor clamped around the supply line can measure up to 30 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load.
..
DESCRIPTION:
The OPA1632 is a fully differential amplifier used to drive high-performance audio analog-to-digital conversion (ADCs). The highest audio quality , which provides very low noise and output drivers , this application is optimized for the de..
DESCRIPTION:
Technical parameters:
Voltage version:5V
The static current:5mA
Working current:190mA
Trigger current:2-4mA
Module description:
1. 30A relay module. normally open interface maximum load: AC 250V/30A. DV 30V/30A;
2. Optical coupling isolation. driving..
FEATURES:
Amp LED Panel Meter W Current Transformer Digital AC Dual Display 300V 100A Volt
Measuring Range:AC 80~300V , AC 0~100A
Display Type:Digit RED & GREEN LED
Resolutions:±1%FS +2 Digit
Operating Temperature:-10 ºC ~65 ºC
Operating Humidity:35~85% RH
..
DESCRIPTION:
Displays the AC voltage and current simultaneously by LED digital tube.
Including one independent small precise current transformer, you can lengthen the cable.
Easy measurement, just connect to power and lead the wire through the current transformer.
Wide measurement voltage..