DESCRIPTION:
0.96-inch OLED module features
high resolution: 128X64 (and 12864LCD the same resolution. but the OLED screen more pixels per unit area)
super wide viewing angle: more than 160 ° (maximum viewing angle display a screen)3. ultra-low power consumption: normal display 0.06W (far..
FEATURES:
High Accuracy, Long-Life Polyester Film Capacitor
Accuracy: ±5%
Wide Operating Temperature Range - -55oC to +125oC
Low Leakage
Easy Mounting
RoHS Compliant
Value : 0.047uf or 47nf or 47000pF or 0.000047mF
..
74HCT138 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL).
74HCT138 decoder accepts three binary weighted address inputs (A0, A1 and A3) and when enabled, provides 8 mutually exclusive active LOW outputs (Y0 to Y7).
74HCT138 features three enable i..
DESCRIPTION:
On-board ADXL345 digital output (supports I2C/SPI), low power, compact acceleration sensor;
Support 5V/3.3V voltage input, onboard RT9161 power chip, lower pressure drop than the 1117, faster load the appropriate speed, ideal for high noise power environment;
The pin has been ..
GY-291 ADXL345 digital tri-axial acceleration due to gravity gradient module I2C/SPI transmission
DESCRIPTION:
The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is fo..
DESCRIPTION:
LiPo batteries are a great way to power your projects. They're small, lightweight, and pack a pretty good punch for their size. Unfortunately, even the best batteries eventually run low on power and when they do it's often unexpected (and at the worst time). Don't be caught by surpri..
DESCRIPTION:
Onboard MMA7455 digital output (I2C/SPI)
Low power
Compact capacitive micromachined accelerometer
Support 5V/3.3V input
Onboard RT9161
Lower pressure drop than the 1117
Faster load the appropriate speed. ideal for noisy power environment
Common pin. pin standard 100mil (2.54mm..
DESCRIPTION:
General purpose board primarily used for components & IC for quick testing, sample circuite, experiments, learning etc.
Tin coated for quick & easy soldering.
SPECIFICATION:
Size: 3x4
Type: Perforated
..
DESCRIPTION:
Wavelength
650nm
Data Rate
15Mbps
Power - Output
-21 ~ -15dBm
Voltage - Supply
2.7 V ~ 3.6 V
Applications
Digital Audio
Current - Supply
8mA
..
DESCRIPTION:
TDA7498 is a 100 w + 100 w class D audio amplifier. The IC chip adopts the single power supply, mainly used in home theater and active speakers. And naked cooling pad up TDA7498 adopted EPU hyper-threading encapsulation.
FEATURES:
Output power:100w+100w (VCC+32V,RL=4ohm,THD=..