Search Criteria
Products meeting the search criteria
Brand: xcluma
Model: BE-001365
DESCRIPTION:
The lithium battery protection board properties:
Model: HX-2S-D20 overcharge voltage range: 4.25-4.35v ± 0.05v
Size: 46 * 20 * 3.6mm over discharge voltage range: 2.5-3.0v ± 0.05v
Upper working current: 13A Operating temperature: -40 --- + 50 ℃
Upper limit instantaneous c..
Rs90.00
Out Of Stock
Brand: xcluma
Model: BE-000218
DESCRIPTION:
Balanced output line using 20AWG multi-beach silicone wire.
Main output line using high-quality 14AWG multi-beach silicone wire.
XT60 plug with a security plug silicone cap.
high-quality AMASS output plug.
Thicker PCB copper, can pass 30A of charge ..
Rs638.00
Out Of Stock
Brand: xcluma
Model: BE-000266
DESCRIPTION:
High Quality 2S-6S Lipo Parallel Charging Board Charger Plate T Plug for Imax B6 B6AC B8 6in1
Our parallel charge boards allow you to charge and balance up to six battery packs simultaneously without a clutter of wires.
Constructed from the highest quality material..
Rs578.00
Out Of Stock
Brand: xcluma
Model: BE-000792
DESCRIPTION:
Designed for general purpose power amplifier and switching applications. This is an original Toshiba transistor for high power audio amplifiers.
High Fidelity Audio Frequency Amplifier Output
Low Harmonic Distortion
High Safe Operation A
..
Rs156.00
Out Of Stock
Brand: xcluma
Model: BE-000791
DESCRIPTION:
Designed for general purpose power amplifier and switching applications. This is an original Toshiba transistor for high power audio amplifiers.
SPECIFICATION:
High Fidelity Audio Frequency Amplifier Output
Low Harmonic Distortion
High Safe Operation Area − 1.0 A/100 V @..
Rs77.00
Out Of Stock
Brand: xcluma
Model: BE-001526
DESCRIPTION:
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We've also beefed up the support circuitry so this board is capable of driving a pair of high-curre..
Rs799.00
Hot
Brand: xcluma
Model: BE-001366
DESCRIPTION:
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chip..
Rs345.00
Brand: xcluma
Model: BE-001368
DESCRIPTION:
ESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module.
The entire solution is the least amount of PCB area. this board is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power technolog..
Rs1,110.00
Out Of Stock
Brand: xcluma
Model: BE-001367
DESCRIPTION:
ESP-32S Wifi Bluetooth combo module is ultra high performance and ultra low-power consumption Wi-Fi and Bluetooth combo wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S integrates dual-core processor, 448 KByte ROM,520 KByte SRAM,16 KByte SRAM in RTC, 802.11 b/g/n/e/I Wi-F..
Rs551.00
Brand: xcluma
Model: BE-001370
DESCRIPTION:
ESP32 is a complete,small form factor(SFF)802.11 b/g/n/e/i(2.4GHz)WLAN plus BT4.2combo solution optimized for low-power,mobile consumer electronics,wearable and Internet of Things(IOT) devices.ESP32 integrates all WLAN and BT functionality in a single package to support a l..
Rs283.00
Out Of Stock
Brand: xcluma
Model: BE-001369
DESCRIPTION:
The use of CP2102 as the bottom of the USB to serial, super stable!
Support a key to download, eliminating the tedious operation
Support ESP32-Bit and other modules
Support Linux, Windows, Mac three development platform
The needle is not reserved for welding, the user can ..
Rs354.00
Brand: xcluma
Model: BE-000936
FEATURES:
1. Size: 11 mm x 27 mm
2. Low power consumption, the power supply voltage of 2.5 V ~ 5 V, working current is microamps level
3. Good linear
4. High sensitivity
5. High stability
6. Wide detection range: 240 nm to 370 nm
7. The big Angle: 130 degrees
8. Schottky type..
Rs264.00
Brand: xcluma
Model: BE-001538
DESCRIPTION:
Board Thickness: 1.6mm
Top side: SSOP20 TSSOP20 (0.65mm pin pitch) to DIP-20 (600 mil body width, 0.1" pin pitch)
Bottom side: SO20 SOP20 SOIC20 (1.27mm pin pitch) to DIP-20 (600 mil body width,, 0.1" pin pitch)
..
Rs36.00
Brand: xcluma
Model: BE-001362
DESCRIPTION:
The main IC uses the original "Seiko" imported components. With overcharge, over discharge, overcurrent, short circuit protection, for a variety of various shapes 3.7V lithium batteries. The use of Japan Seiko protection IC, VISHAY, AOS, IR and other high-quality ..
Rs45.00
Brand: xcluma
Model: BE-000215
DESCRIPTION:
This is a simple and compact LiPoly balance charger for 2~3s batteries. It features built in JST-XH balance plug ports and 3 LEDs to indicate charge status.
Comes with Inbuilt Power Supply. So you can straightaway plug it into the wall outlet. It's an ideal charger to charge your ..
Rs318.00
Showing 1 to 15 of 15 (1 Pages)