Search Criteria
Products meeting the search criteria
Brand: xcluma
Model: BE-000080
DESCRIPTION:
The TSL2561 Luminosity Sensor Breakout is a sophisticated light sensor which has a flat response across most of the visible spectrum. Unlike simpler sensors, the TSL2561 measures both infrared and visible light to better approximate the response of the human eye. And because the T..
Rs313.00
Brand: xcluma
Model: BE-000445
DESCRIPTION:
Please note, EM4100 read-only and can not rewrite. If you want to buy can rewrite the tags, you should buy EM4305 chip tags.
APPLICATIONS:
Enterprise / campus card, bus stored value card, express way fees, parking, district management, attendance systems, patrol system, enterpris..
Rs34.00
Brand: xcluma
Model: BE-000207
DESCRIPTION:
motor brush controller for Electric bicycle & scooter
rated voltage: dc 24 v
Current limit : 22A
rated power: 250 w
matching motor: dc brushed motor
Under Voltage Protection: 20V
Wires Interface Definition
Battery :Thick Black (Power Negative) /Thick Re..
Rs495.00
Brand: xcluma
Model: BE-001509
DESCRIPTION:
Brand new and high quality.
Input voltage range: 3.5V-30V (output set voltage higher than the input voltage must be guaranteed)
Output voltage range: 4.0V-30V
Input maximum current: 5A (based on power conservation under nominal conditions the output current Uin * Iin *..
Rs364.00
Brand: xcluma
Model: BE-000558
The 74HC125; 74HCT125 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE).
A HIGH on nOE causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes.
This enables the use of current limiting resistors to interface inputs to ..
Rs170.00
Brand: xcluma
Model: BE-000252
FEATURES:
Supply voltage (Vin): DC5V ±5%
Current Consumption: 2mA (MAX 5mA)
Humidity measuring range: 20 to 95% RH.
..
Rs243.00
Brand: xcluma
Model: BE-000979
DESCRIPTION:
4.0 BLE bluetooth to uart transceiver Module Central Peripheral HM-10 CC2540
100% Brand new and high quality.
support Central and Peripheral mode switch, modify by AT commander
Support Remote control mode, remote device can control PIO pin or modify settings by AT commander ..
Rs256.00
Brand: xcluma
Model: BE-000518
AT24C256 24C256 Kbit Serial I2C Bus EEPROM IC DIP.This device is capable of both random and sequential reads up to the 256K boundary.sequential reads up to the 256K boundary. Functional address lines allow up to eight devices on the same bus, Functional address lines allow up to eight devices o..
Rs32.00
Brand: xcluma
Model: BE-007124
DESCRIPTION:
The CC2500 adapter is a low-cost 2.4 GHz transceiver adapter designed for very low-power wireless applications.
APPLICATIONS:
Wireless Sensor Network.
Wireless Device Control.
Wireless Data Transfer.
Wireless Energy Metering
Home Automation
These are used in differ..
Rs384.00
Brand: xcluma
Model: BE-000133
Model
KG316T-II
Frequency
50Hz
Contact Capacity
25A 220V AC(Resistive Load)
Build-in Battery
DC 1.2V/40MAH
Power Consumption
<2W
Clock Error
<1Second/Day
Open/Close Time
16Times..
Rs615.00
Brand: xcluma
Model: BE-000458
EM4305 125khz PROGRAMMABLE RFID SMART TAGS REWRITABLE KEYFOBS
..
Rs51.00
Brand: xcluma
Model: BE-000484
DESCRIPTION:
A small audio speaker that is ideal for radio and amplifier projects and is small enough to fit in robot projects.
Features:
Small Size
Power rating: 0.25W
Impedance: 8 ohm
Diameter: 40mm / 4cm approx
Thickness: 5mm approx
..
Rs29.00
Brand: xcluma
Model: BE-000788
DESCRIPTION:
The HEXFET technology is the key to international Rectifier's advanced line of power MOSFET transistors. The efficient geometry and unique processing of this latest "state of the art" design achieves: very low on-state resistance combined with high transconductances; superior reverse..
Rs49.00
Brand: xcluma
Model: BE-000537
These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very lo..
Rs20.00
Brand: xcluma
Model: BE-000670
General Description:
The LM2575 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load with excellent line and load regulation. This devices gives fixed output voltage of 5V.
 ..
Rs34.00
Brand: xcluma
Model: BE-000529
The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions Versions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. The LM2576 series offers a high-efficiency replacement for popular three-t..
Rs18.00
Brand: xcluma
Model: BE-001410
DESCRIPTION:
Constant Current Constant Voltage (CC CV) DC Buck, or switching non isolated asynchronous CC CV converter. based on the specialised IC LM2596S, output regualtion driven by a TI AOP, leading to a very stable regulation. Sanyo Low ESR Solid Caps, very low output ripple (5-10mV on avera..
Rs81.00
Brand: xcluma
Model: BE-000377
DESCRIPTION:
Input voltage: 4.5-50V,
The volume of L 40 * W 21.5 * H 13.5mm (including potentiometers).
Input: IN+ input positive IN- input negative
Output: OUT+ output positive OUT- output negative
Adjustment method: first correct input power (between 4.5-50V) then multimete..
Rs34.50
Brand: xcluma
Model: BE-000046
High performance DC to DC step-down adjustable power supply module, switching regulator.
1. Input voltage: 3.2-40V
2. Output Voltage: 1.5-35V (adjustable) ,input must least high 1.5V than output
3. Output current: rated current 2A, maximum 3A (need to add heat sink), if the output pow..
Rs46.00
Brand: xcluma
Model: BE-001716
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00
Brand: xcluma
Model: BE-001717
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00
Brand: xcluma
Model: BE-001724
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00