Fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
Technical Specifications
The current sensor chips: ACS712ELC-20B
Pin 5V power supply, on-board power indicator
 ..
Fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
Technical Specifications
The current sensor chips: ACS712ELC-30B
Pin 5V power supply, on-board power indica..
fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
Technical Specifications
The current sensor chips: ACS712ELC-05B
Pin 5V power supply, on-board power in..
DESCRIPTION:
Power supply: Need matchs outside battery (do not include the battery)
Function: Bluetooth connection, plug wire connection card radio voice prompt function remote call
Size: 40x5x50mm
Broadcast time: 24 hours
Whether to support APP: yes
Connection mod..
FEATURES:
100% Brand New.
Size: 48mm x 29mm x 22mm.
Display color: Red & Blue LED (dual display).
Display: 0.28" LED digital.
Operating voltage: DC 4 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Measure current: 1A~50A ( Need external Shunt, included here)
Note:I..
Product description:
100% Brand New.
Size: 48mm x 29mm x 21mm.
Display color: Red & Blue LED (dual display).
Display: 0.28" LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Minimum resolution (V)..
Product description:
Brand new and high quality.
Voltage rating: AC 220V 50/60HZ.
Voltage limit: AC 180V-250V.
Hysteresis: 2 sec/day (25 Centigrade).
On/off operation: 17on & 17off.
Power consumption:7.5VA (MAX).
Display: LCD.
Service life: Mechanically 107.
..
DESCRIPTION:
100% brand new and high quality
Charge module- Linear charging.
It has MICRO USB female
It still retain the input voltage wiring solder joints, can be very convenient to DIY
..
DESCRIPTION:
Handy device for testing LED's. Simply plug your LED into the correct holes (all of which are marked) and push the button to see its brightness, illuminant color, etc.
Handy device for testing LED's (2-150mA)
Simply plug your LED into the correct holes ..
DESCRIPTION:
This non-invasive current sensor clamped around the supply line can measure up to 30 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load.
..
DESCRIPTION:
The OPA1632 is a fully differential amplifier used to drive high-performance audio analog-to-digital conversion (ADCs). The highest audio quality , which provides very low noise and output drivers , this application is optimized for the de..
Features:
Diameter 9.0mm conductor through hole
Output voltage proportional to AC and DC current
Wide sensing current range 0~100A at 5V volt
High sensitivity 22mV/A
Wide operating voltage range 3.0~12 V.
Low operating current 3mA
Isolation voltage 4000V
Ratiometric output from supply voltag..
DESCRIPTION:
The Winson WCS1702 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and Communications systems. The unique package allows for easy implementation by the customer. Typical applications include Motor Control load detection and m..
DESCRIPTION:
The Winson WCS1702 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and Communications systems. The unique package allows for easy implementation by the customer. Typical applications include Motor Control load detection and m..
DESCRIPTION:
100% Brand New and High Quality
Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC.
IC control circuit and a power LED spot light utility.
Control circuit chip with RGB components in a package in 5050, to form a complete external ..