Description
Output DC and
AC dual output, can output DC and AC voltage, fully compatible with all
kinds of electric appliances
Without
connecting wires, you need to solder the input and output wires yourself.
Instructions
for use: This product ca..
Product descriptionDescription:Constant voltage output to ensure the stability of the power supply. Efficient work and low temperature.Input voltage 110V/230V is selected by switch. Before power on please check input voltage avoiding damage.Safety Protection: Overvoltage protection, short circuit pr..
Product descriptionDescriptionMainly used in a variety of DC equipment, DC motor step less speed regulation, LED electrodeless dimming, chemical plating, speed control, scientific research, testing, students, etc., and widely used.Please Note: no matter the voltage is set to several V, the maximum c..
Description The Power Supply For Whole Isolation Type Industrial-grade Built-in Power Supply Module, Temperature Protection, Over Current Protection And Short Circuit Protection, AC 85 ~ 265v Wide Voltage Input, High And Low Voltage Isolation, 5V 1A \ DC12V 1A Dual Output Voltage Isolation, 431 Volt..
Description:
5V700MA high-performance version Optimized design, suitable for control board,
the power supply system of single-chip microcomputer is very stable and reliable
Working temperature: -20 degrees to 70 degrees, high-end green gold capacitors
with a temperature resistance of 105 degre..
Product descriptionInput voltage 110/220 (V),Output Power 10 (W), The output voltage 5 (V)Protections: Overload / Over Voltage / Short CircuitType: AC/DC power supply, Modulation Pulse frequency modulationWork efficiency 80 (%),Output ripple noise 100mVOutput voltage accuracy 10 (%),Voltage regulati..
AC DC AC 220V to DC 24V 1.5A 36W Switching Power Supply Module Bare CircuitOutput power:24WInput:AC100-240V 50/60HzOutput:DC24V 1.5AShort circuit protection, overload protection, over temperature protectionSize:8.6x4x2.6cm/3.39x1.57x1.02inchPackage includes:1 x Power Supply Module..
Description
• The HLK-10M09 Hi-Link 9V 10W AC to DC Power Supply Module is ultra-small
series power supply module is a small volume, power module designed for
customers by Hi-Link.
• It has the advantage of global input voltage range, low-temperature rise, low
power consumption, high efficien..
Description
·
5V 2A high efficiency best version, suitable for control, single-chip
board system.
·
The output is completely isolated from the input and low voltage.
· &..
AC-DC 5V 700mA,110V 220V to DC 5V Step Down Transformer 3.5W Power Supply ModuleStep Down ModuleWith temperature protection, over current protection and short circuit protection, high and low voltage isolation, AC85 ~ 265 v wide voltage input, AC/DC current , 431 precision voltage stability DC5V out..
Description
·
Easy installation, input and output can be welded 5.08 terminal or PIN
to use.
·
Four corners have fixed mounting holes and fixed with anti-motion
screws. The fixing hole diameter ..
Description①High voltage and high frequency AC output port, can be connected with tungsten bulb, heating wire and other resistive load or voltage multiplier rectifier circuit②High voltage DC output port can be connected with switching power load, such as small electrical appliances with nominal 100-..
DC Motor Micro 300 Solar DC 3V 4.5V 5V Motor For DIY Toys, For CD Player, 2 Pins Plug Spacing 2.0mm PH2.0mm Brush MotorsDescription:Solar drive motor, the motor toy.Voltage Range:DC3V-6VNo-load speed:3500-7000 rpm / minNo-load current: about 25mAWeight:20g Package included:1 x DC 3V 4.5V ..
Description
• Transform voltage from DC 12V to AC 110V 220V
• Output waveform: frequency square wave
• Adopt quality PCB board, durable for use
• Mainly used for electronic DIY work before the inverter stage
• The quiescent current is 0.05A around
• Made of quality material, it's durable
Sp..
HiLink AC DC Circuit Converter Power Module HLK-20M12 220V to 12V 20WProduct features:
1). Meet UL, CE requirements
2). Ultra-thin, ultra-small
3). All voltage input (AC: 90 ~ 264V)
4). Low ripple and low noise
5). Output..
Description• Ultra-thin, ultra-small, minimum volume in the industry• Universal input voltage ((90~245Vac)• Low power consumption, environmental protection, no-load loss <0.1W• Low ripple and low noise• Good output short circuit and over-current protection and self-recovery• High efficiency, high..
HLK-1D0505A 5V 1W 200mA DC to DC 88% transfer efficiency power supply modules replace B0505S-1WR3Product performance:1. Isolation between input and output is required (isolation voltage 1500VDC or less)2. No-load input current as low as 5mA3. The voltage of the input power supply is relatively stabl..
HLK-2M05 AC DC 100 - 240V to 5V Step Down Power Supply Module Ultra-Thin, Subminiature, The Full Voltage Input (90 ~ 264 vac) Low Ripple and Low Noise, Output Overload Short Circuit Protection Function High Efficiency and Power Density, Product Design to Meet the EMC and Safety Testing Requirements ..
MP1584EN 3A Mini DC-DC Buck 24V to 12V 9V 5V 3V Adjustable Step Down Module Replace LM2596Mini MP1584EN DC to DC buck converter module with a wide operating rangeInput voltage: 4.5 V to 28 V; Output voltage: 0.8 V to 20 VOutput current: 3 A (maximum); Conversion efficiency: 92% (maximum)Output rippl..
TB6600 4.5A Stepper Motor Driver Board Controller Replace TB6560 DC 10-45VMaterial: Metal and plastic.Operating voltage DC 10V-45V.Recommended to use DC32V power supply switch power supply.High-speed optical coupling 6N137, ensure high speed without losing step.The use of high current, high voltage ..