4 points solenoid valve, water inlet valve, 12V automatic control valve

Description

• The solenoid valve is a one-way valve, and the water flow can only go in one direction. The solenoid valve is provided with a check function.
• There is no need to worry that the water will flow back to the pipe when the water stops.
• The end of the solenoid valve with a filter screen is the water inlet. the direction pointed by the arrow is the direction of water flow.
• When installing, drain port should be as far down as possible. No positive or negative wiring. 

Features

• Type: Normally closed (power on, power off)
• Use medium: liquid water and other liquids suitable for the work of the product
• Thread Size: G 1/2"
• Working Temperature: 32-212 °F
• Working Pressure: 0.02~0.8Mpa
• Material: the body part is plastic, the joint is copper
• Filtering function: Detachable cleaning filter device
• Check function: Yes
• Operating parameters: DC12v = current 315 mA / power 4.3W

Product Usage:

• The water inlet solenoid valve is connected in parallel with the high-pressure water pump and connected to the computer board.
• When making water or flushing water, the water inlet solenoid valve is opened and the high-pressure water pump works; in the standby state, the water inlet solenoid valve is closed and the high-pressure water pump stops.
• The function of the water inlet solenoid valve is to open the water inlet when the water is in or flush, and close the water in the standby or power failure, so as to achieve no waste of water when the pure water machine is not working.