Menu
Your Cart

Atmega48PA PU Microcontroller

FEATURES:
  • High Performance, Low Power AVR® 8-Bit Microcontroller
  • Advanced RISC Architecture
    • 131 Powerful Instructions – Most Single Clock Cycle Execution
    • 32 x 8 General Purpose Working Registers
    • Fully Static Operation
    • Up to 20 MIPS Throughput at 20 MHz
    • On-chip 2-cycle Multiplier
  • • High Endurance Non-volatile Memory Segments – 4K Bytes of In-System Self-Programmable Flash progam memory
    • 256 Bytes EEPROM (ATmega48PA)
    • 512 Bytes Internal SRAM (ATmega48PA)
    • Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
    • Data retention: 20 years at 85°C/100 years at 25°C(1)
    • Optional Boot Code Section with Independent Lock Bits
      • In-System Programming by On-chip Boot Program
      • True Read-While-Write Operation 
    • Programming Lock for Software Security
  • • Peripheral Features
    • Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
    • One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
    • Real Time Counter with Separate Oscillator
    • Six PWM Channels
    • 8-channel 10-bit ADC in TQFP and QFN/MLF package Temperature Measurement
    • 6-channel 10-bit ADC in PDIP Package Temperature Measurement
    • Programmable Serial USART
    • Master/Slave SPI Serial Interface
    • Byte-oriented 2-wire Serial Interface (Philips I2C compatible)
    • Programmable Watchdog Timer with Separate On-chip Oscillator
    • On-chip Analog Comparator
    • Interrupt and Wake-up on Pin Change
  • • Special Microcontroller Features
    • Power-on Reset and Programmable Brown-out Detection
    • Internal Calibrated Oscillator
    • External and Internal Interrupt Sources
    • Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
  • • I/O and Packages
    • 23 Programmable I/O Lines
    • 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF
  • • Operating Voltage:
    • 1.8 - 5.5V for ATmega48PA
  • • Temperature Range:
    • -40°C to 85°C
  • • Speed Grade:
    • 0 - 20 MHz @ 1.8 - 5.5V
  • • Low Power Consumption at 1 MHz, 1.8V, 25°C for ATmega48PA:
    • Active Mode: 0.2 mA
    • Power-down Mode: 0.1 µA
    • Power-save Mode: 0.75 µA (Including 32 kHz RTC)

Write a review

Please login or register to review