Brand: xcluma
Model: BE-002722
Description: • 2 channel Modbus relay module equipped with mature and stable 8-bit MCU and RS485 level communication chip• adopt standard MODBUS RTU format RS485 communication protocol.• It can realize 2bit input signal detection and 2-bit relay output.• It can be used for digital detection or ..
Rs429.00
Brand: xcluma
Model: BE-002723
DescriptionThe four-way Modbus relay module is equipped with mature and stable 8-bit MCU and RS485 level communication chip.Using the standard MODBUSRTU format RS485 communication protocol, it can realize 4 input signal detection and 4 relay output, which can be used for digital detection or power c..
Rs922.00
Brand: xcluma
Model: BE-002487
Description
• This is USB controlled relay board with 2 channels. Military grade PCB board
production.
• Adopting for HID technology, so no need to install any driver in for windows
system and you can easy to use.
• The relay can control the maximum voltage 250V, 10A AC load and 30V, 10A DC
..
Rs409.00
Brand: xcluma
Model: BE-002846
Description:
·
It is a 4 Channel USB Switch Controller. Board power sockets and
terminals, two power access methods are convenient and flexible.
·
After the power is con..
Rs792.00
Brand: xcluma
Model: BE-002847
Module
introduction:
·
The module adopts HID technology, the quality of foreign trade, no need
for any driver, the download data comes with the application, plug and play.
·
Support WIN7, XP 32-..
Rs839.00
Brand: xcluma
Model: BE-002527
Working voltage: DC 5VWorking current: ≥250MaThis WIFI relay based on AI-Thinker ESP-01S WIFI module.
It is designed for smart home, Internet of thing and other DIY
project.
With this smart relay, you will easy to DIY your smart switch to
control any device by your phone anywhere...
Rs114.00
Brand: xcluma
Model: BE-000201
DESCRIPTION:
Arduino dedicated Relay Shield, 4-way 3A relay control, xbee wireless module.
Independent external power supply and optocoupler isolation, effectively avoid electromagnetic interference devices charged.
SPECIFICATIONS:
External power supply voltage: 7 ~ 12..
Rs663.00
Hot
Brand: xcluma
Model: BE-000057
Product description:
This module is in line with international safety standard, control areas and load area have the isolation groove.
Have power and relay operation instructions, connect the light will on, disconnect the light will off.
When signal i..
Rs33.00
Brand: xcluma
Model: BE-000164
DESCRIPTION:
1.It's a new digital LED countdown display 12v delay module module.
It can be widely used with various control switch places.
2.It can set the delay time,can press "set" buttons.
After setting up, power-up setting value is previous setting delay time
as we set last time (po..
Rs295.00
Hot
Brand: xcluma
Model: BE-000052
Product description:
1. Working Voltage: DC12V -/+ 10%
2. Current:Standby≤10mA,Working ≤128mA
3. Working Temperature: -10'C—+60'C
4. Receiver Frequency: 315MHz/433.92MHZ
5. Receiving Sensitivity: -105dB
6. Output State: Swit..
Rs677.00
Out Of Stock
Brand: xcluma
Model: BE-000058
Product description:
- Brand new and professional high quality delay switch module
- With power indicator LED and trigger indication LED
- Output is voltage free & can be connected up ..
Rs51.00
Brand: xcluma
Model: BE-000020
Product description:
This is a 5V 2-Channel Relay interface board,Be able to control various appliances, and other equipments with large current.It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
..
Rs60.00
Hot
Brand: xcluma
Model: BE-000035
DESCRIPTION:
SIZE : 54MM * 75MM
This is a 5V 4-Channel Relay interface board,Be able to control various appliances, and other equipments with large current.It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
..
Rs118.00
Brand: xcluma
Model: BE-000100
Product description:
This relay module is 5V active low.
It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
It is also able to control various appliances and other eq..
Rs235.00
Out Of Stock
Brand: xcluma
Model: BE-000165
DESCRIPTION:
12V relay contact capacity 10A 250V, with optocoupler protection.
I / O port driver is active low. Active Low means when Input is low, Relay Will Trigger
Used as a microcontroller development board module can be used as appliance control, can be u..
Rs499.00
Brand: xcluma
Model: BE-000319
DESCRIPTION:
Technical parameters:
Voltage version:5V
The static current:5mA
Working current:190mA
Trigger current:2-4mA
Module description:
1. 30A relay module. normally open interface maximum load: AC 250V/30A. DV 30V/30A;
2. Optical coupling isolation. driving..
Rs164.00
Brand: xcluma
Model: BE-002275
DC 12V 1 channel relay module with optocoupler1 channel relay module with 12V coil relay. Low level signal triggers the relay. 3 pin terminal connector on switching sode for easy to conenct wires. On the input end there is a 3 pin male header with standard 0.1" pitch. Relay specifications : 10A..
Rs33.00
Brand: xcluma
Model: BE-002276
DC 12V 2 channel relay module with optocoupler This 2 Road/Channel Relay Module (with light coupling) 12V module meets the safety standard as control areas and load area have the isolation groove. Optical coupling isolation module.The triggering of the 2 Road/Channel Relay Module is reliable, m..
Rs79.00
Brand: xcluma
Model: BE-002278
DC 12V 4 channel relay module with optocoupler The 12V 4 channel relay module is equipped with optocoupler isolation, Maximum load AC 250A 10A, DC 30V 10A, support all SCM control, widely used in PLC control, home intelligent control, industry etc.Features:1. This is a 12V 4 channel relay modul..
Rs155.00
Brand: xcluma
Model: BE-002279
DC 12V 8 channel relay module with optocoupler This is a 12V 8-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (For Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) . ..
Rs305.00
Brand: xcluma
Model: BE-001907
Single Channel 1 Relay 5V Low Level OMRON Solid State Relay Module with Fuse Solid State Relay 250V 2A..
Rs97.00
Brand: xcluma
Model: BE-000286
DESCRIPTION:
1, omron 5V solid state relay omron 240V2A output resistance fuse 240V2A
2, size: 55 * 33 *25(length * width * height), net weight: 21.5g
3, input power supply: 5V DC (160MA)
4, input control signal voltage:
(0-2.5V Status low level relay ON)
(3.3-5V state high level r..
Rs189.00
Brand: xcluma
Model: BE-001936
OMRON 5V 240V solid state relay 2A, output with resistance type fuse 240V 2A. size: 57*55*25 3 the input power supply: 5V DC (160MA) the input control signal voltage: (0-2.5V the state of low level relay ON) (3.3-5V high level relay OFF) the 2.54CM pin and blue KF301 terminal is connected to t..
Rs425.00
Brand: xcluma
Model: BE-002124
8 Channel 5V DC SSR Solid State Relay Module Low level trigger 250V 2AThis 5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module is based on the G3MB SSR relay which can control up to 2A at 240VAC. This is an 8 Channel SSR relay module, each relay channel has 3 separate terminals, NO..
Rs779.00
Brand: xcluma
Model: BE-000305
DESCRIPTION:
SSR Application:
With a switch no spark. no noise.high switching speed.anti-corrosion.moisture-proof.
anti-vibration.long life.high reliability.electromagnetic compatibility and other characteristics.
It can be widely used in aerospace.marine.household appliances.machine tools.tel..
Rs207.00