Oled display, no need backlight, self-illumination, the display performance is better than the traditional lcd display, also lower consumptionDriver ic: Ssd1306 size: 091 inch oled resolution: 128 x 32 iic interface display color: BluePin description: Gnd: Power ground vcc: Power + (dc 33 ~5v) scl: ..
0.96 inch oled display 12864 spi serial port 7Pin- Yellow and BlueFeatures:Needn't backlight, the display unit can self-luminousHigh resolution: 128 * 64Viewing angle:> 160 °Supports many control chip: Fully compatible with for Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.Ultra-..
0.96 inch oled IIC I2C Serial White Display Module 128X64 I2C SSD1306 12864 - BlueFully compatible with for Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.Ultra-low power consumption: full screen lit 0.08WSuper high brightness and contrast are adjustableWith embedded driver/controllerInte..
1.3 Inch IIC I2C Serial 128x64 SSH1106 SSD1306 OLED LCD Display LCD ModuleDriver IC: SSH1106.Resolution: 128*64Four square holes are easy to installUltra-low power consumption: full screen lit 0.08wThe IIC address can be changed,it is convenient to use with different machinesSupports many control c..
This is 1.8 inch serial SPI colour display moduleSupport analog SPI and hardware SPI, SPI serial128X160 resolution, clear displayThe LCD Display Module can be driven with at least four IOWith SD card slot for convenient function expansionThe LCD has a wide viewing angle, the contrast is also very su..
Type: Touch panelSize: 2.4 inch SPI Serial DisplayTFT active matrix Pixel arrangement: RGB vertical stripeDriver IC: ILI9341Backlight: White LEDDepth: 262K/65KResolution (dots): 240RGB*320 Dots 5V compatible, use with 3.3V or 5V logic Need at least 4 IOs from your MCU with PCB plate (including power..
Type: Without touch panelSize: 3.2 inch SPI Serial DisplayTFT active matrix Pixel arrangement: RGB vertical stripeDriver IC: ILI9341Backlight: White LEDDepth: 262K/65KResolution (dots): 240RGB*320 Dots 5V compatible, use with 3.3V or 5V logicNeed at least 4 IOs from your MCU With PCB plate (includin..
Features: - The MAX30102 is an integrated pulse oximeter and heart rate monitor bio sensor module. It integrates a red LED and an infrared LED, photo detector, optical components, and low-noise electronic circuitry with ambient light suppression. - The MAX30102 features a 1.8V power supply and a sep..
DESCRIPTION:
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all ty..
DESCRIPTION:
0.96-inch OLED module features
high resolution: 128X64 (and 12864LCD the same resolution. but the OLED screen more pixels per unit area)
super wide viewing angle: more than 160 ° (maximum viewing angle display a screen)3. ultra-low power consumption: normal display 0.06W (far..
DESCRIPTION:
Color: Yellow+Blue 4pin
FEATURES:
Size: 0.96'' inch
Pixels: 128X64
Driver IC: SSD1306
Viewing angle: > 160 degrees
Power Supply: 3.3V to 5V
Volume: 27MM * 27MM * 4.1MM
Communication: IIC, only two I / O ports
No font: The software takes word ..
Product Description:
LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications.
A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits.
These modules are preferred ..
Product Description:
LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications.
A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits.
These modules are preferred ..
DESCRIPTION:
Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe
Specification:
Voltage detection precision: +_0.01V.
Unit voltage display range: 0.5~4.5V
Total voltage display range: 0.5~36V
Low voltage alarm mode for 2-8S
1S test mode voltage range: 4-15V
Alarm set value range:OFF~2.7~3.8V
Size: 40mm x..
The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up library - you 'll have it running in under 10 minutes! . Works best with any classic Arduino ATMEGA328 Board (UNO/Duemilanove/Diecimila) Not for Mega2560 and due.
Produc..
DESCRIPTION:
Use LCD screen as display devices.
SPI interface, maximum limit save the I/O resources.
Specially added five rocker, convenient implementation structures, human-computer interaction interface, all the rest of the analog and digital interface with pin derivatio..
DESCRIPTION:
Arduino LCD Keypad Shield
This is a 16x2 LCD and Keypad shield for Arduino Uno, Diecimila, Duemilanove and Freeduino boards.
Blue Backlight with white words
uses 4 Bit Arduino LCD Library
Left, Right, Up, Down and Select buttons
Scr..