0 to 20mA/40mA to 0-3.3V 0-5V 0-10V Current to Voltage Converter Signal Conversion Module 0-20mA 4-20mA I/V TransmitterProduct introduction:In the process of circuit signal transmission, the voltage signal will become weaker as the transmission distance increases, and the current transmission can pr..
This board adopts the principle of the common differential mode lc, which can suppress interference in the switching power supply or other dc power supply.Reduce the ripple of the power supply, and reduce the interference brought by the power supply.Can be used in low voltage (0 v 50 50 v) dc power ..
1200W high power DC-DC boost constant voltage constant current adjustable car charging power module Input DC10-60V output 12-83VModule parameters: Module model: SZ-BT07CCCV-AModule name:1200W boost constant current module Module properties:Non-isolated boost module (BOOST)Input volta..
20A 300W DC Buck Module Constant Current Adjustable Step-Down Converter CC CV Power Module High Power Module Buck ConverterIntroduction to synchronous rectification technology:Synchronous rectification is a new technology that uses a dedicated power MOSFET with very low on-resistance to replace the ..
Description
·
The output voltage can be set to 5V/8V/12V, the default is 12V
·
Input voltage range: 2.5V~VOUT. The input voltage must be lower than the
set output voltage
· &n..
4A 5.5-30V to 0.5-30VDC-DC with LCD Display Buck Boost Converter Automatic Adjustable Voltage Step Up DownFeatures:LCD input and output voltage, output current output power;Input anti-reverse protection, reverse connection will not burn;Can be step-up and step-down, the output voltage 0.5-30V arbitr..
The DC-DC synchronous rectification step-down module has ultra-high conversion efficiency and low heat generationInput DC5.5~32V, stable output 5V 1A long-term work, no need to add heatThe pins are compatible with the LM7805 three-terminal voltage regulator block and can be replaced directlyThe inpu..
1, small size: 22 * 18 * 10cm almost all mobile power shell can be easily installed2, full-featured: The market known as the mobile power modules are mostly single function, such as single boost, single charge, single protection, and this product includes boost, lithium battery smart charging, lithi..
Module Properties: non-isolated buck module (BUCK) synchronous rectification Input voltage: DC 6-12V Output voltage: 5.1-5.2V Output current: 3A MAX Conversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value)Switch frequency: 500KHz Output..
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car ChargeFour-channel independent special charging management IC, can effectively support a variety of mobile phones to charge.High quality double gold plated USB port, the life is 2 times of ordinary USB .Supp..
Description The Power Supply For Whole Isolation Type Industrial-grade Built-in Power Supply Module, Temperature Protection, Over Current Protection And Short Circuit Protection, AC 85 ~ 265v Wide Voltage Input, High And Low Voltage Isolation, 5V 1A \ DC12V 1A Dual Output Voltage Isolation, 431 Volt..
Adjustable Step-down Module Voltage and Ammeter 32V5A 160W CNC DC Stabilized Power SupplyInput voltage range:6-40.00VOutput Power Range:0-160WOutput voltage range:0-32.00VOutput Current range:0-5.100ADimensions:85mm*58mm*31mmSupport Center distance:79mm、57mmOutput voltage setting and reading resolut..
Description• Input: DC 4.5V--12V (input voltage must be higher than the output voltage to 1V or more.)• Output: 5V, (load current must not exceed 800ma)• Dual panel design, layout nice• Specially designed two pin mounting holes, can be directly fixed on hole board for extended experiments• 5 i..
Description
• Input: 4.5 V DC - 7 V (input voltage must be higher than the output
voltage)
• Output: 3.3 V, 800 mA (The load current may not exceed 800mA)
• AMS1117-3.3V Step-Down Converter pin out can be easy to connect with your MCU
development and provide a constant power supply
• The Volta..
One Channel input: DC 6V - 12V (input voltage must be output voltage higher than 1V or more.) Triple Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current must not exceed 800ma), 12V (12V input directly to the output) Specially designed two pin mounting holes, can be directly f..
DC-DC Power Supply Module 24V/12V to 5V 5A Converter 4 USB Fast ChargingThis module can be used for DIY modified cars, motorcycles, mobile power, battery USB charging port, to the phone, MP3 or other digital products charge, high efficiency, versatile!Not to say that the power module has 5A current,..
Input voltage: DC 3.5~30VOutput voltage: DC 0.8~29VOutput current: 10A (MAX)Conversion efficiency: 92%Blue digital display, the static current is 2-8mA (depends on the tube status)Onboard voltmeter: It can display the input voltage and output voltage, pressing the button of bottom short press digita..
Description
·
CCM5D DC Motor Speed Regulator controls the speed of a DC motor by
adjusting Pulse-Width-Modulated (PWM).
·
Large 0.56 inch 3-digit LED display numbers allow viewing under the most
a..
Description• Ultra-thin, ultra-small, minimum volume in the industry• Universal input voltage ((90~245Vac)• Low power consumption, environmental protection, no-load loss <0.1W• Low ripple and low noise• Good output short circuit and over-current protection and self-recovery• High efficiency, high..
Type: DC/DC Constant Current / Constant Voltage Size: (L*W*H)4.80*2.40*1.4cm/1.89"*0.94"*0.55" **Input Voltage: 5V-57V input voltage must be higher 2V than the output voltage **Output Current: rated current 2.5A/ 3A MAX ( Heat-sink Needed) **Output Voltage: 1.25-30V (Adjustable)Output Power: 15w max..