Menu
Your Cart

Arduino Uno R3 Compatible Board Atmega328P | Ch340G | No Usb Cable

Arduino Uno R3 Compatible Board Atmega328P | Ch340G | No Usb Cable
  • Stock: Out Of Stock
  • Brand: xcluma
  • Model: BE-000110
  • Weight: 23.00g
  • MPN: BE-000110
Rs229.00
(GST +18%Extra)
 
 
Product description:
 
Main changes from the older version: 
  • Add two rows of the holes for the pins. So it can be connected with normal Dupont line. 
  • Add 3 rows of the holes for wiring. 
  • Change the in-line package of ATMEGA328P to flat package. 
  • CH340G replace ATmega16U2
Technical Details:
  • Microcontroller: ATmega328 
  • Operating voltage: 5V 
  • Input Voltage (recommended): 7-12V  
  • Digital I/O Pins: 14 ( of which 6 provide PWM output) 
  • Analog Input Pins: 6 
  • DC Current per I/O Pin: 40mA 
  • DC Current for 3.3V pin: 50mA 
  • Flash Memory: 32 KB (ATmega328) of which 0.5KB used by bootloader 
  • SRAM: 2 KB (ATmega328) 
  • EEPROM: 1 KB ( ATmega328) 
  • Clock Speed: 16 MHZ 
  • USB Chip CH340G
Usage Instructions:
  • Click here for the driver software
  • Before connecting the Board to your USB port:
 
  1. Download the “ch341ser.exe” file and run it.
  2. The software asks whether it can install the CH341SER.INF driver for the CH340 chip. Click INSTALL
  3. A Windows message asks whether the driver has installed correctly. Click YES.
  4. Connect your Board.
  5. From Control Panel, open Device Manager and Ports. If installed correctly you should see an entry “USB-SERIAL CH340 (COMXX)
  • Install Arduino IDE Download Here http://arduino.cc/en/Main/Software
  • Connect Board to Computer and open Arduino IDE.
  • Select board as "Uno" in Arduino IDE.
  • To Know the COM Port Goto Control Panel > Device Manager and see COM PORT.
  • Start burning your programs

Package Include:
 
  • 1X ATMEL ATmega328  CH340G BOARD , USB Cable not included
 

Write a review

Please login or register to review