Out Of Stock
5A 75W USB CC CV DC-DC LED DRIVE LITHIUM CHARGER STEP-DOWN MODULE
- Stock: Out Of Stock
- Brand: xcluma
- Model: BE-000063
- Weight: 35.00g
- MPN: BE-000063
Rs147.00
(GST +18%Extra)
PRODUCT DESCRIPTION:
100% Brand new and high quality.
Highlights :
Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products.
Note:
1.When you use the product, the module inputs and outputs to be isolated from ground.
2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V.
3.Some customers report: “The module can not adjust the output voltage is always equal to the input voltage.” When you encounter this problem, please counterclockwise rotation of the “voltage potentiometer” 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V.
Specifications
1.Input voltage range:5-36VDC
2.Output voltage range:1.25-32VDC adjustable
3.Output current: 0-5A
4.Output power: 75W
5.High efficiency up to 96%
6.Built in thermal shutdown function
7.Built in current limit function
8.Built in output short protection function
9.Input reverse polarity protection: None (if required, high current diode in series with the input).
10.L x W x H =68.2×38.8×15mm
11.Weight: 39g
Application
1.Use as a step-down modules with overcurrent protection
Usage:
(1) Adjust the right button so that “OUT” LED lighted, Digital meter shows the value of output voltage ,adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A)
(3) Connected to the load.
2.Use as a battery charger
Usage:
(1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA)
(2)Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V)
(3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined Charging current value.
(4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged)
(5)connected to the battery charge.
(1,2,3,4 steps as: Output is unloaded, do not connect the battery)
3.Use as a LED constant current driver module
Usage:
(1)Adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined LED operating current.
(3)Connect LED, work.
You may also like
0 to 20mA/40mA to 0-3.3V 0-5V 0-10V Current to Voltage Converter Signal Conversion Module 0-20mA 4-20mA I/V TransmitterProduct introduction:In the pro..
Rs205.00
This board adopts the principle of the common differential mode lc, which can suppress interference in the switching power supply or other dc power su..
Rs102.00
1200W high power DC-DC boost constant voltage constant current adjustable car charging power module Input DC10-60V output 12-83VModule parameters:&nbs..
Rs775.00
12V/24V to 5V dual socket 3A DC-DC car charging lithium battery charging board charger module + protection dual functionProduct Information:DC-DC..
Rs119.00
Hot
20A 300W DC Buck Module Constant Current Adjustable Step-Down Converter CC CV Power Module High Power Module Buck ConverterIntroduction to synchronous..
Rs413.00
Description
·
The output voltage can be set to 5V/8V/12V, the default is 12V
· ..
Rs61.00
400W 15A Step-up Boost Converter LED Driver 8.5-50V to 10-60V Voltage Constant Current ModuleDescription:Module name :400W boost constant current modu..
Rs454.00
4A 5.5-30V to 0.5-30VDC-DC with LCD Display Buck Boost Converter Automatic Adjustable Voltage Step Up DownFeatures:LCD input and output voltage, outpu..
Rs775.00
The DC-DC synchronous rectification step-down module has ultra-high conversion efficiency and low heat generationInput DC5.5~32V, stable output 5V 1A ..
Rs73.00
Hot
1, small size: 22 * 18 * 10cm almost all mobile power shell can be easily installed2, full-featured: The market known as the mobile power modules are ..
Rs26.00
Module Properties: non-isolated buck module (BUCK) synchronous rectification Input voltage: DC 6-12V Output voltage: 5.1-5.2V Output current: 3A MAX C..
Rs58.00
Out Of Stock
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car Charger
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car ChargeFour-channel independent special charging managemen..
Rs533.00
Out Of Stock
Description The Power Supply For Whole Isolation Type Industrial-grade Built-in Power Supply Module, Temperature Protection, Over Current Protection A..
Rs420.00
Out Of Stock
Adjustable Step-down Module Voltage and Ammeter 32V5A 160W CNC DC Stabilized Power SupplyInput voltage range：6-40.00VOutput Power Range：0-160WOutput v..
Rs1,311.00
Description• Input: DC 4.5V--12V (input voltage must be higher than the output voltage to 1V or more.)• Output: 5V, (load current must not excee..
Rs17.00
Description
• Input: 4.5 V DC - 7 V (input voltage must be higher than the output
voltage)
• Output: 3.3 V, 800 mA (The load current may not exceed..
Rs21.00
Hot
Input voltage: 6v-40v output voltage: 5v output current: 3a switching frequency: 150khz conversion efficiency: 92 percent working temperature: -40 to ..
Rs85.00
One Channel input: DC 6V - 12V (input voltage must be output voltage higher than 1V or more.) Triple Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v e..
Rs35.00
DC-DC Power Supply Module 24V/12V to 5V 5A Converter 4 USB Fast ChargingThis module can be used for DIY modified cars, motorcycles, mobile power, batt..
Rs322.00
Input voltage: DC 3.5~30VOutput voltage: DC 0.8~29VOutput current: 10A (MAX)Conversion efficiency: 92%Blue digital display, the static current is 2-8m..
Rs604.00
Random Products
Out Of Stock
DESCRIPTION:
This is the XBee 3mW Wire Antenna Series 2C module from Digi. Series 2C improves on the power output and data protocol. These modules ..
Rs1,268.00
Hot
1N5822 SCHOTTKY BARRIER RECTIFIER DIODE..
Rs6.00
Product description:
- Brand new and professional high quality delay switch module
..
Rs51.00
Hot
W25Q64 64Mbit 8MByte Flash Memory Module DataFlash SPI InterfaceProduct Features:Using serial nor flash external expansion memory chip w25q64Support S..
Rs68.00
PI Fan, Active Cooling Fan for Customized Acrylic Case
Support RPi model b Customized Acrylic Case & RPi model b+ Customized Acrylic Case..
Rs73.00
Feature:
Differential 4-Channel Multiplexer with Two Binary Control Inputs
The Two Binary Inputs Select Which Pair of the 4-Channels is Connec..
Rs17.00
This STC single chip microcomputer supports 3.3V and 5V of STC. 3.3 external power supply current is up to 500MA, and there is no need to worry a..
Rs179.00
Product name: POM Passive model round pulleyMaterial: POMColour: Black OutsideDiameter: 24mmThickness:11mmInside Diameter: 5mmBearing type: 625zz bear..
Rs115.00
High quality anodized color heat sink for Raspberry Pi 4B, motherboard IC heat sink kit with adhesiveFeatures:Quantity : 3pcsMaterial : AluminumColor ..
Rs45.00
Description
·
5V 2A high efficiency best version, suitable for control, single-chip
board system...
Rs266.00
PI Camera FFC Cable 15 Pin 22 Pin 15CM Ribbon Line For Raspberry Pi Zero WDescription:This this the new camera cable for raspberry pi zero W / zero 1...
Rs62.00
New
Out Of Stock
Product descriptionFeaturesDigital displaying of temperature, humidity and turning frequency. It applies the microcomputer chips to have strong a..
Rs3,812.00
Out Of Stock
DESCRIPTION:
1.On-board MMA7361 (replace MMA7260) low-cost micro capacitive acceleration sensor.
2.Support 5V/3.3V voltage input. RT9161 onboard. ..
Rs96.00
Out Of Stock
Features:
128K x 8
2-Wire Serial, I2C
Input Voltage 2.7-5V DC
DIP-8 Package..
Rs155.00
MC34063 is a 1.5 A, Step-Up/Down/ Inverting Switching Regulators The MC34063 is a monolithic control circuit containing the primary functions required..
Rs15.00
New
Hot
Product descriptionFeaturesDC power supply: DC 5V-30VOutput signal: RS485 signalTemperature accuracy: ±0.5℃ (25℃)Humidity accuracy: ±3%RHTemperature r..
Rs639.00
Out Of Stock
DESCRIPTION:
Designed to enable the engineer to “program’’ unijunction characteristics such as RBB, η, IV, and IP by merely selecting two resistor ..
Rs27.00
Out Of Stock
FEATURES:
Inductance: 1uH
Inductance Tolerance: ± 10%
No. of Pins: 2..
Rs5.00
ESP8266 NodeMCU Expansion Base BoardThis NodeMCU ESP8266 Expansion Base Board is an expansion board designed to work with the NodeMCU V3 ESP..
Rs165.00
DESCRIPTION:
QFP FQFP TQFP 32 44 64 80 100 LQFP SMD To DIP
It's dual-side, one side is applicable to the pitch 0.5mm (compatible with 32~100 pin),..
Rs85.00