433MHz Smart Wireless Remote Control Switch AC 85V 110V 220V 1CH for Home Office with Wall Switch

433MHz Smart Wireless Remote Control Switch AC 85V 110V 220V 1CH for Home Office with Wall Switch

• Wall Panel Transmitter:Operating Frequency: 433MHzBattery Model: CR2032 (Package Not included battery)Dimensions: 86mm x 86mm x 13mmDistance: indoor (20 meters) outdoor (80 meters)Technical Data Of Receiver:Input Power: AC 85V - 250VStandby Current: 97dbmTransmitting distance: 20-50m ( open space)Decoding mode: MCU software decodingRemote storage: 20pcsSupport remote type: Learning code 1527Code
• Working mode: Momentary, Toggle,LatchingDimension of PCB: 53.8*31.2mm
• Notice:The package Included different products because you choose a Different options.Package List 1:1Pcs * 433MHz 1 Gang Wall Panel Remote Control (No Include Battery)Operation Introduction:About Working Mode:Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects
• Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.Clearing the Code:Press the Learning Button on the receivers for 8 times, the codes will be cleaned.After cleaning the code, all the remote control cannot work any more.Learning the Code:(Momentary)Press the learning key on the receiver once time, it comes into momentary setting mode.Wait for a moment, the LED will be off , it comes into learning state.
• Push the remote button, LED indicator on the receiver board will flash then come off.After 3 seconds, the LED indicator will be on again, learning successfully.Learning the Code:( Latching)Note: When you choose for latching mode, in order to learn more remote control, you need to learn two differentbutton, the first time learning is for ON, the second time learning for OFF.For example: Button A = ON, Button B = OFFPress the learning key on the receiver triple time, it comes into latching mode